|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
02-02-2013, 02:56 AM | #1 |
Senior Member
Join Date: Jan 2011
Location: Long Beach, CA
Posts: 181
|
'32 Ford Throttle to Dual 97's
I am working on connecting my stock '32 Ford Gas Spoon Linkage from the Firewall to my pair of Stromberg 97's on the Passenger side. Anyone have a good picture of the type of rod they used and if they connected the rod to the front or the rear carb? I have the carb's connected over on the drivers side.
|
02-02-2013, 07:40 AM | #2 |
Member
Join Date: May 2010
Location: Puyallup WA
Posts: 49
|
Re: '32 Ford Throttle to Dual 97's
Try this link
http://www.stromberg-97.com/linkage/...ts.asp#prodfrm |
Sponsored Links (Register now to hide all advertisements) |
|
02-02-2013, 09:17 AM | #3 |
Senior Member
Join Date: May 2010
Location: Salado, TX.
Posts: 733
|
Re: '32 Ford Throttle to Dual 97's
Here's one example from my '30 roadster:
__________________
Luck occurs when preparation and opportunity converge. |
02-02-2013, 10:01 AM | #4 |
Senior Member
Join Date: Aug 2010
Location: Sevierville, Tenn.
Posts: 391
|
Re: '32 Ford Throttle to Dual 97's
Speedway sells linkages with snap on ends for both the carbs and the pedal. My recommendation is to order a "too long" rod. Though the rod has both right and left hand thread, the rod threads easily and can be cut to any length and then run over with a die. Too long permits a bend in the rod. Without the bend, the pedal arm may just bring the throttles down to a certain point. The bend allows the throttle to come fully to wide open position. It takes some tinkering but is simple and looks neat.
|
02-02-2013, 10:24 AM | #5 |
Senior Member
Join Date: Oct 2011
Location: CT.
Posts: 596
|
Re: '32 Ford Throttle to Dual 97's
Sponsored Links (Register now to hide all advertisements)
__________________
A man should do what he thinks best! "The Duke" |
|
|
Sponsored Links (Register now to hide all advertisements) |
|