The Ford Barn

Tony Hillyard · 01-18-2018, 02:00 PM

Evening everyone

I have just up-loaded a new video to Youtube. It's about removing the rear axle and transmission. Hopefully it will be helpful to other members.

See link:

https://www.youtube.com/watch?v=2Sz3Zp_jEHQ&t=430s

All the best

Tony Hillyard

Questus · 01-18-2018, 02:22 PM

thanks Tony

GREAT and fast in time so many Things to do !!

regards Questus

slammin · 01-18-2018, 04:55 PM

Great video Tony. I look forward to more!

JDupuis · 01-18-2018, 05:02 PM

Well done Tony! Jeff

Bill in NJ · 01-18-2018, 09:22 PM

Does any body have the measurements to make the dolly for the rear ??

Tony Hillyard · 01-19-2018, 02:25 AM

Sponsored Links (Register now to hide all advertisements)

Bill,

I will measure mine up for you a little later to-day and post them on the site.

Regards

Tony

Tom F OHIO · 01-19-2018, 08:34 AM

Tony, I like the way you did the video by doing all the taking of bolts out real fast and getting to the next part of the job. I've seen some videos on you tube where they take 2 minutes to take out a bolt. By the second one I'm bored with it and turn it off.

Tony Hillyard · 01-19-2018, 08:40 AM

Afternoon Bill,

Picture and dimensions of my Model A rear axle dolly. I hope this helps.

All the best

Tony

3.6rs · 01-19-2018, 09:15 AM

Quote:

Originally Posted by Tom F OHIO

Tony, I like the way you did the video by doing all the taking of bolts out real fast and getting to the next part of the job. I've seen some videos on you tube where they take 2 minutes to take out a bolt. By the second one I'm bored with it and turn it off.

FF ? You can do what ever you want with a video : stop, rewind, pauze, FF,...

jhowes · 01-19-2018, 09:16 AM

When I tried to get to the utube video, I got one on removing the transmission from an early 28. That was followed by a differential rebuild that was not Tonys. Any thoughts. Jack

Terry, NJ · 01-19-2018, 09:16 AM

Yes it was helpful! Thanks for posting.
Terry

Tony Hillyard · 01-19-2018, 09:42 AM

jhowes,

On Youtube it selects the next video normally by subject rather than who made it. If you are curious, and want to have a look at other videos I have made, go to Youtube.com in the search box near the top type in - Tony Hillyard - and you should find my channel. I think there are nine videos on there with various subjects from fitting a supercharger on an MG to repairing the electric window system on my VW van.

I hope you enjoy them..All the best

Tony Hillyard

BillCNC · 01-19-2018, 10:05 AM

Quote:

Originally Posted by Tony Hillyard

jhowes,

On Youtube it selects the next video normally by subject rather than who made it. If you are curious, and want to have a look at other videos I have made, go to Youtube.com in the search box near the top type in - Tony Hillyard - and you should find my channel. I think there are nine videos on there with various subjects from fitting a supercharger on an MG to repairing the electric window system on my VW van.

I hope you enjoy them..All the best

Tony Hillyard

Or, Click on persons name who posted the video. It will take you to their youtube page.

Davew · 01-19-2018, 12:02 PM

Great video and thanks for the plans

Jeff/Illinois · 01-19-2018, 12:07 PM

Great video, well done! And, thank you!!

chap52 · 01-19-2018, 01:04 PM

Great video, appreciate your sharing.

henry's 31 · 01-19-2018, 08:14 PM

Thank you so much for the excellent video and for the specs on the differential dolly.

01-18-2018, 02:00 PM	#1
Tony Hillyard Senior Member Join Date: Sep 2014 Location: Pleines Oeuvres, Normandy, France Posts: 194	New video on Youtube Evening everyone I have just up-loaded a new video to Youtube. It's about removing the rear axle and transmission. Hopefully it will be helpful to other members. See link: https://www.youtube.com/watch?v=2Sz3Zp_jEHQ&t=430s All the best Tony Hillyard

01-18-2018, 02:22 PM	#2
Questus Member Join Date: May 2017 Location: near Lübeck Northeastern part of Germany Posts: 34	Re: New video on Youtube thanks Tony GREAT and fast in time so many Things to do !! regards Questus

01-18-2018, 04:55 PM	#3
slammin Senior Member Join Date: Aug 2017 Location: Fruita, CO Posts: 281	Re: New video on Youtube Great video Tony. I look forward to more!

01-18-2018, 05:02 PM	#4
JDupuis Senior Member Join Date: Jan 2017 Location: Maryhill Ont Canada Posts: 834	Re: New video on Youtube Well done Tony! Jeff __________________ Let's let pylons, be pylons!

01-18-2018, 09:22 PM	#5
Bill in NJ Senior Member Join Date: May 2010 Posts: 1,159	Re: New video on Youtube Does any body have the measurements to make the dolly for the rear ??

01-19-2018, 02:25 AM	#6
Tony Hillyard Senior Member Join Date: Sep 2014 Location: Pleines Oeuvres, Normandy, France Posts: 194	Re: New video on Youtube Sponsored Links (Register now to hide all advertisements) Bill, I will measure mine up for you a little later to-day and post them on the site. Regards Tony

01-19-2018, 08:34 AM	#7
Tom F OHIO Senior Member Join Date: May 2010 Location: Mansfield, Ohio Posts: 408	Re: New video on Youtube Tony, I like the way you did the video by doing all the taking of bolts out real fast and getting to the next part of the job. I've seen some videos on you tube where they take 2 minutes to take out a bolt. By the second one I'm bored with it and turn it off.

01-19-2018, 09:16 AM	#10
jhowes Senior Member Join Date: Jul 2010 Location: upstate NY near Mass border Posts: 789	Re: New video on Youtube When I tried to get to the utube video, I got one on removing the transmission from an early 28. That was followed by a differential rebuild that was not Tonys. Any thoughts. Jack

01-19-2018, 09:16 AM	#11
Terry, NJ Senior Member Join Date: May 2010 Location: Bucks Co, Pa Posts: 3,740	Re: New video on Youtube Yes it was helpful! Thanks for posting. Terry

01-19-2018, 09:42 AM	#12
Tony Hillyard Senior Member Join Date: Sep 2014 Location: Pleines Oeuvres, Normandy, France Posts: 194	Re: New video on Youtube jhowes, On Youtube it selects the next video normally by subject rather than who made it. If you are curious, and want to have a look at other videos I have made, go to Youtube.com in the search box near the top type in - Tony Hillyard - and you should find my channel. I think there are nine videos on there with various subjects from fitting a supercharger on an MG to repairing the electric window system on my VW van. I hope you enjoy them..All the best Tony Hillyard

01-19-2018, 12:02 PM	#14
Davew Senior Member Join Date: Sep 2017 Location: Minnesota Posts: 113	Re: New video on Youtube Great video and thanks for the plans

01-19-2018, 12:07 PM	#15
Jeff/Illinois Senior Member Join Date: May 2010 Posts: 2,789	Re: New video on Youtube Great video, well done! And, thank you!!

01-19-2018, 01:04 PM	#16
chap52 Senior Member Join Date: Jun 2013 Location: Marana Arizona Posts: 1,776	Re: New video on Youtube Great video, appreciate your sharing.

01-19-2018, 08:14 PM	#17
henry's 31 Senior Member Join Date: Mar 2014 Location: Columbus(Cataula) Georgia Posts: 849	Re: New video on Youtube Thank you so much for the excellent video and for the specs on the differential dolly. __________________ Henry' s 31