|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
04-02-2017, 02:27 PM | #1 |
Senior Member
Join Date: Nov 2014
Location: Southampton, England
Posts: 326
|
Windscreen Frame
My windscreen didn`t fit what I`d call properly when I acquired the car. When closed there was a small gap at the top narrowing as it went down to the bottom on the passenger side but on the drivers side at the top the gap is quite a bit bigger again narrowing down to the bottom.
I can see no reason for it, the hinge fits where it should, before I started the refurb I was happy to leave it but as I have had a problem with the frame thought I might as well try and sort it. Is it common for there to be a gap ? I`ve not had the body off, the gap came with the car, the doors line up and close fine.............
__________________
Love a Lot, Trust a Few
Always Paddle Your Own Canoe |
04-02-2017, 02:35 PM | #2 |
Senior Member
Join Date: May 2010
Location: Young Harris, GA
Posts: 1,824
|
Re: Windscreen Frame
On the Coupe in your avatar?
__________________
Jim Cannon Former MAFCA Technical Director "Have a Model A day!" |
Sponsored Links (Register now to hide all advertisements) |
|
04-02-2017, 03:18 PM | #3 |
Senior Member
Join Date: Nov 2014
Location: Southampton, England
Posts: 326
|
Re: Windscreen Frame
Sponsored Links (Register now to hide all advertisements)
__________________
Love a Lot, Trust a Few
Always Paddle Your Own Canoe |
|
|
Sponsored Links (Register now to hide all advertisements) |
|