The Ford Barn

sofield · 01-01-2021, 03:16 PM

When trying to adjust the fingers on the clutch plate, is the plate bolted to the flywheel and disc and the adjustment being between 5/8 & 11/16 after final adjustment Your answers are appreciated.

Gary WA · 01-01-2021, 05:39 PM

yes!

Patrick L. · 01-02-2021, 07:54 AM

Sponsored Links (Register now to hide all advertisements)

I'll assume this stuff is all sitting on the bench. Then the answer is yes. The fingers should be within .002" of each other. Either 5/8 or 11/16 will work, most prefer 11/16.

01-01-2021, 03:16 PM	#1
sofield Member Join Date: Aug 2013 Location: Long Island NY Posts: 72	Clutch finger adjustment When trying to adjust the fingers on the clutch plate, is the plate bolted to the flywheel and disc and the adjustment being between 5/8 & 11/16 after final adjustment Your answers are appreciated.

01-01-2021, 05:39 PM	#2
Gary WA Senior Member Join Date: May 2010 Location: Clinton,WA/Whidbey Island Posts: 4,101	Re: Clutch finger adjustment yes! __________________ www.whidbeymodelaclub.com

01-02-2021, 07:54 AM	#3
Patrick L. Senior Member Join Date: May 2010 Location: Largo Florida Posts: 7,225	Re: Clutch finger adjustment Sponsored Links (Register now to hide all advertisements) I'll assume this stuff is all sitting on the bench. Then the answer is yes. The fingers should be within .002" of each other. Either 5/8 or 11/16 will work, most prefer 11/16.