|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
11-05-2020, 01:05 PM | #1 |
Senior Member
Join Date: May 2010
Location: Tinley Park Ill
Posts: 1,060
|
I should know this But what else is new
Any way. What is the best way to check to see if your timing gear needs to be replaced.
Right now if you place your hand over the carburetor when cranking, there is no suction to be feltat all. Thanks Roger |
11-05-2020, 01:10 PM | #2 |
Senior Member
Join Date: May 2010
Location: (Not far enough...) Outside of DC
Posts: 3,387
|
Re: I should know this But what else is new
Never had to confront this but I wonder if you could pull the plugs and spin the engine and try to observe valve action by peering thru the spark plug holes?
__________________
-Jeff H Have you thought about supporting the Early Ford V-8 Foundation Museum? |
Sponsored Links (Register now to hide all advertisements) |
|
11-05-2020, 01:52 PM | #3 |
Senior Member
Join Date: Jul 2011
Location: SF Bay Area
Posts: 6,633
|
Re: I should know this But what else is new
Observing the action of the distributor rotor should be somewhat enlightening!
__________________
Alan |
11-05-2020, 07:17 PM | #4 |
Member Emeritus
Join Date: Nov 2012
Location: Wichita KS
Posts: 16,132
|
Re: I should know this But what else is new
Sponsored Links (Register now to hide all advertisements)
|
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|