C-head

[372dart]

Want to put a C-head on my A. Is there gonna be any problems?

[Art Bjornestad]

You will need a B water pump but that's about it.

[Bob C]

Not really besides needing a B water pump. You don't gain much
as the C head is only 4.6 as compared to 4.22 compression ratio.
See Vince's site http://www.fordgarage.com/pages/ABcy...comparison.htm

Bob

[Purdy Swoft]

You will need two normal length head studs to replace the long water outlet studs used with the model A head You will get near a seven horsepower boost and the model B water pump is a big improvement over the A pump. It cools noticeably better and doesn't have as much tendency to over pump out water around the radiator cap and out the over flow tube like the model A water pump will. The C head is the poor mans high compression head. The improved heart shaped combustion chamber is a huge improvement over the A head There are dyno tests on the Piranio web site that shows the results of a stock model A engine with a C head and no other mods. I have run these heads and can tell you for sure that there is an improvement You want notice as much improvement as a 5.5 or 6.0 head but if you need a head and already have the C head, I would sure use it.

[372dart]

Sponsored Links (Register now to hide all advertisements)

Thanks guys, the c-head and a Stipe 330 cam should do. Thankyou