|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
|
11-20-2020, 12:30 PM | #1 |
Senior Member
Join Date: May 2010
Location: Long Island, NY
Posts: 3,466
|
Most Difficult Restoration Tasks
Looking back at all of the restoration projects I have had hands-on, the most difficult tasks that I recall are:
1. Bending the exterior roof molding on my Victoria; 2. Installing a top on a Sport Coupe; 3. Making doors lineup with the body; 4. Fitting the noses of 1931 running board aprons to nestle into the front fenders; 5. Preparing for painting a body, fenders & aprons. What were yours?
__________________
Bob Bidonde |
11-20-2020, 12:43 PM | #2 |
Senior Member
Join Date: Jun 2015
Location: Signal Mtn, TN (SE TN)
Posts: 2,371
|
Re: Most Difficult Restoration Tasks
Most anything about a cabriolet
They are cranky bodies; combine the factors of wood, flex, making the top keep pressure, Windows (especially in a B, door line up ........ I’ve done one of most body style. The 180a would be my second in line |
Sponsored Links (Register now to hide all advertisements) |
|
11-20-2020, 12:45 PM | #3 |
Senior Member
Join Date: Nov 2018
Location: Dahlonega, Ga
Posts: 251
|
Re: Most Difficult Restoration Tasks
For me it’s a toss up between making all new wood for my ‘29 Tudor or doing the body work, but it was all fun and came out very well.
|
11-20-2020, 01:26 PM | #4 | |
Junior Member
Join Date: Dec 2017
Location: Painesville, OH
Posts: 22
|
Re: Most Difficult Restoration Tasks
Quote:
Thanks, John
__________________
"Our times are characterized by a perfection of means and a confusion of ends." - A. Einstein |
|
11-23-2020, 06:32 PM | #5 |
Senior Member
Join Date: Feb 2014
Location: Florida - 32128
Posts: 416
|
Re: Most Difficult Restoration Tasks
I have the same situation, in reference to my Sport Coupe. I have a ton and half $ money into my project and I am searching for the best money saving possible way to tackle installing a new top. Lot me know how you make out.... [email protected]
Dave |
11-20-2020, 01:45 PM | #6 | |
Senior Member
Join Date: May 2010
Location: Eastern Tennessee
Posts: 11,513
|
Re: Most Difficult Restoration Tasks
Sponsored Links (Register now to hide all advertisements)
Quote:
, , , , 'Experience is something you don't get until after you needed it!!' |
|
11-20-2020, 04:07 PM | #7 |
Senior Member
Join Date: May 2010
Location: Washington Cty., ME or Flagler Cty., FL
Posts: 1,106
|
Re: Most Difficult Restoration Tasks
Bob, I laughed when I saw the first item on your post. For me it was the moulding on my 1932 five window Coupe. I also have a 31 Cabriolet which this past summer I was assemb lying the body and striving to get the door gaps correct and making the wood for the top belt rail. It is a nightmare. Ed
|
11-20-2020, 05:07 PM | #8 |
Senior Member
Join Date: Aug 2012
Location: South East Wisconsin
Posts: 1,279
|
Re: Most Difficult Restoration Tasks
Door alignment for me as well. I spent a good month aligning the 4 doors on our 28 Phaeton. The right front eluded me. I had to settle for simply latching securely.
|
11-20-2020, 11:24 PM | #9 |
Junior Member
Join Date: Nov 2014
Posts: 19
|
Re: Most Difficult Restoration Tasks
I'll second that one, spent countless hours working on the right front door of mine also!
|
11-20-2020, 05:39 PM | #10 |
Member
Join Date: Oct 2020
Location: East Sandwich, MA
Posts: 62
|
Re: Most Difficult Restoration Tasks
For me it was anything that requires working for long periods of time under the car. My ‘65 Mustang sits waiting for me to refinish the last 10% of the underside after a lengthy project to strip, repair and repaint it. Dirty, tedious and awkward !
Sent from my iPhone using Tapatalk |
11-20-2020, 07:41 PM | #11 |
Member
Join Date: Jul 2020
Location: Cameron WV
Posts: 59
|
Re: Most Difficult Restoration Tasks
Worst for me was the complete rebuild and adjusting the brakes. With no knowledge of a mechanical brake system it was scary from the point, if I mess something up it will never stop. Now. piece of chocolate cake with ice cream. Still alot of tedious work but pays dividends.
|
11-20-2020, 08:10 PM | #12 |
Senior Member
Join Date: Jul 2011
Location: Southwestern Connecticut
Posts: 931
|
Re: Most Difficult Restoration Tasks
For me it was fitting a new windshield header. I must have had that thing in and out of the car six or eight times. You can't really tell if it is right until you get a bunch of the roof wood installed...then you take it all apart again.
__________________
Style beats speed any day, and with a lot fewer tickets. |
11-20-2020, 08:53 PM | #13 |
Senior Member
Join Date: May 2010
Posts: 1,770
|
Re: Most Difficult Restoration Tasks
getting the money to pay for all the parts & paint
|
11-20-2020, 08:57 PM | #14 |
BANNED
Join Date: Dec 2019
Posts: 1,196
|
Re: Most Difficult Restoration Tasks
Sport Coupe top? Love it..not only that no one likes a soft top that doesn't go down,the first sentence of the installation instruction,written by a professional upholsterer says this is a difficult top to install ..volume 5 of the MAFCA restoration series covers it some and the instructions with the actual kit is thorough..bought a pneumatic stapler,studying the instructions religiously..all thats left is the courage to dive in..Ive done all the work on this car, and for the most part it shows,reckon top installation won't be any different.
|
11-20-2020, 10:06 PM | #15 |
Senior Member
Join Date: May 2013
Location: Lake Forest, California
Posts: 239
|
Re: Most Difficult Restoration Tasks
Sometimes the hardest part is getting motivated. I have so many things to work on (besides the cars) that it is sometimes overwhelming. Once my hands are dirty I tend to be in a happy place, I just have to get out there.
__________________
Experience is a cruel teacher. It gives the exam first, then the lesson. |
11-22-2020, 09:42 AM | #16 |
Senior Member
Join Date: Aug 2016
Location: Alberta
Posts: 930
|
Re: Most Difficult Restoration Tasks
Ditto. It's nice to hear that I am not alone. One thing I find vexing is that these cars are VERY simple in design and made to be assembled fast and easy on an assembly line and yet we spend hours/days on a single task. It's understandable with some things where the parts we are using don't fit right or need repairs but other things baffle me why it takes as long as it does when I KNOW to could;t have taken anywhere NEAR this long at the factory.
|
11-20-2020, 10:49 PM | #17 |
Senior Member
Join Date: Mar 2013
Location: Bend Or.
Posts: 1,057
|
Re: Most Difficult Restoration Tasks
Adjusting the main bearing shims, with the motor in the car.
It will never stop dripping, and usually right in your eye.
__________________
Bill Worden 1929 Roadster 1929 Briggs Town Sedan 1930 Closed Cab pickup Smith Motor Compressor 1951 Ford F1 High Desert Model A's |
11-21-2020, 06:51 AM | #18 |
Senior Member
Join Date: Feb 2011
Location: NNNNNNNNJJJJJJJJJJ
Posts: 6,787
|
Re: Most Difficult Restoration Tasks
Sometimes the hardest part is getting motivated x2
cant tell you how many times Ive gone out to the garage to work, get side tracked, and just admire the heap of rust and wood and go back inside ..... guess Im in denial. |
11-22-2020, 01:16 PM | #19 | ||
Senior Member
Join Date: May 2010
Location: Eastern Tennessee
Posts: 11,513
|
Re: Most Difficult Restoration Tasks
Quote:
Quote:
I will share a little secret from my side of the fence. I got this trick from from my Dad and I have modified it for my business. It is very easy to get overwhelmed, ...and especially if you have multiple projects going on simultaneously. I set-up a generic 'To-do' list for each project we have going on in the shop. Many people that have visited my shop have seen these lists. For the overall project, we have each of the tasks listed on a spreadsheet by individual components, -then individual tasks needed, -and then by projected priority. Our master list has between 800 - 850 tasks listed for the overall project depending on bodystyle. Then each discipline for us (Cleaning, Wood, Sheetmetal, Paint, Upholstery, Machine, etc.) has even more detailed items broken down by component on a separate list. For example, in the Wood area, if we are working on a Tudor, the master list just says 'Fabricate Wood' however the separate Wood list has each of the different pieces listed so they can be checked-off as they are fabricated. Naturally this is probably WAY more detailed for most home hobbyists however this list is still needed for your project. Make a list going over each facet of what you are planning on doing in your project. Make a priority of what components need to be restored, and set predecessors of that task. For example, if you have 'Restore Frame' written on your list, you need to list each of the tasks you will need to do to restore the frame. For example, before you paint the frame, you know you need to strip the frame, so list that. Before you bodywork the frame you know you need to straighten the frame. Before you straighten the frame, you need to check for and repair defects (-cracks, deep pits, missing rivets, etc.). Excel allows you to sort these tasks easily and then you print your list. On ours, we print the list in Landscape mode so we have more room for adding notes beside the task. That note might be a reminder to make sure you order & have rivets, or a replacement running board bracket, -or whatever on hand before you begin that task. Nothing wastes time & motivation like getting ready to do a particular task and not having the parts or tools at that moment to do the task. While this seems like a lot of work (-and it is), it is a great way to stay motivated and on track with your project. When you first get into the garage, you look at your list and pick a task you will be doing first thing. This helps you resist getting side tracked as you are able to get focused immediately. Once that particular task is completed, you cross that job off your list however you don't throw away the completed list. Referring back to the list allows you to see exactly how far you have been. Also, when you are working on a particular task, as thoughts cross your mind about other type tasks on your list, add those notes to your sheet for you to refer to later. I hope this 'it works for us' idea helps someone who might seem overwhelmed. |
||
11-22-2020, 02:47 PM | #20 | |
Senior Member
Join Date: Sep 2016
Location: Roanoke, VA USA
Posts: 1,908
|
Most Difficult Restoration Tasks
Quote:
I’ve seen some of Brent’s lists. They are indeed impressive, and they definitely contribute to an excellent end result for the restorations. It does help if you happen to be “a list person.” (I am. My current list saved me some time over the weekend by helping me to perform several tasks in their proper order, without skipping a prerequisite.) If you are not “a list person,” I could see you not wanting to take the time to make the lists. Sent from my iPhone using Tapatalk |
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|