Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 12-11-2018, 07:13 PM   #1
A V8 Al
Junior Member
 
Join Date: May 2010
Posts: 16
Default FN!!STtXx!! Window channels

I replaced the (missing) door window channels and regulators on my 1933 T 1 1/2 truck. The regulators are Vintique and work ok (?); but the window channels I bought from Mac's a while back ( Argentina made) are an impossible fit. The large slot access hole is too small, the slot is too narrow and too thick, and the slot is too short. Are there any better alteratives to these pieces of STXx!,...? Ticked off Al
A V8 Al is offline   Reply With Quote
Old 12-11-2018, 07:52 PM   #2
Karl Wescott
Senior Member
 
Karl Wescott's Avatar
 
Join Date: May 2010
Location: Oregon
Posts: 1,265
Default Re: FN!!STtXx!! Window channels

First, there are much better repro's of the bottom channel for 1932-33 made by United Pacific.


Second, if you are using Vintique regulators, they are likely 1926-31 coupe/tudor/pickup, of which the end will not work on the 1932 bottom channels. The end would need to be changed to the 1932 style.
Karl Wescott is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 12-11-2018, 08:14 PM   #3
A V8 Al
Junior Member
 
Join Date: May 2010
Posts: 16
Default Re: FN!!STtXx!! Window channels

Sponsored Links (Register now to hide all advertisements)
Thanks for the input Karl. I bought the regulators from CG Parts listed as 1932-34 pickup truck. I need to replace the roller on the lift arm?
A V8 Al is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 09:47 AM.