The Ford Barn

freddie · 03-28-2018, 09:57 AM

I am re-building this truck (total frame off restoration). The body work, gearbox and diff is complete. Removed the one top and noticed a 0.3mm ridge on the sleeves. What I realy want to know is whether one can identify an egin as being a 221 or 239 from lokking at something. What I do know is that it is a 90hp based on the serial number which start with 11A-. Will apreciate your knowledge sharing.

Kurt in NJ · 03-28-2018, 10:03 AM

Bore diameter,--3-1/16, 221. 3-3/16 --239

freddie · 03-28-2018, 12:16 PM

Sponsored Links (Register now to hide all advertisements)

Thanks

03-28-2018, 09:57 AM	#1
freddie Member Join Date: Dec 2014 Location: South Africa Posts: 63	Engin size I am re-building this truck (total frame off restoration). The body work, gearbox and diff is complete. Removed the one top and noticed a 0.3mm ridge on the sleeves. What I realy want to know is whether one can identify an egin as being a 221 or 239 from lokking at something. What I do know is that it is a 90hp based on the serial number which start with 11A-. Will apreciate your knowledge sharing.

03-28-2018, 10:03 AM	#2
Kurt in NJ Senior Member Join Date: May 2010 Location: on the Littlefield Posts: 6,159	Re: Engin size Bore diameter,--3-1/16, 221. 3-3/16 --239

03-28-2018, 12:16 PM	#3
freddie Member Join Date: Dec 2014 Location: South Africa Posts: 63	Re: Engin size Sponsored Links (Register now to hide all advertisements) Thanks