Old Henry Where are You?

[mfagan]

Anxious to hear hold Old Henry's rebuild is coming
along....is he going to be ready for the upcoming trip?

Please let us know.

[1931 flamingo]

He's started a new thread.
Paul in CT

[Old Henry]

Here I am: http://www.fordbarn.com/forum/showth...=1#post976443s

Just heading on the road trip with Pepe and Old Henry that I just picked up and was delivered to me without any additional charges.

[Bolts]

Looking forward to the next episode of "Travels With Pepe".

[mfagan]

Super that you're back on the road!!

Look forward to hearing about your trip.

[BILL WZOREK]

Sponsored Links (Register now to hide all advertisements)

Henry:
Two Thumbs up.
When you have a chance go back & read all the threads / although some were sounding negative & there wanted you to rebuild it there way. It really shows how forgiving these Flatheads are , and there are many / many ways to get to the ultimate
end which is Getting on the road , keep the dirty side down & the shinny side up.

Also where is this trip taking you & Pepe ?

[Barry-ct]

Enjoy your trip! We're all there with you in spirit!

[C26Pinelake]

Hope you have a safe trip, keep us informed.
Wayne

[Old Henry]

I drove 300 miles last night and today on a quick overnight road trip with Pepe. We just headed down the highway southbound and stopped when I was too tired to drive any more. Stayed in a dive motel built of cinder blocks in the 20's run by a guy that lived in an old rock house next door built during the civil war.



The engine ran smoother than it ever has. I was accidentally creeping up to 75-80 mph without even realizing it, and could still see through my mirrors (previously at those speeds I'd have just enough vibration to shake the mirrors so I couldn't see clearly through them.)

[green50]

Glad to see that your up and running again. Enjoy the ride!

[Drbrown]

Hope you broke a bottle of champagne over the bumper first. Wish I could hear that engine. You find some great places for overnights (no interior pictures ?). Best regards .........

[Old Henry]

Originally Posted by Drbrown

Wish I could hear that engine. Best regards .........

The engine isn't much to listen too installed with the muffler on. One place I stopped for gas the guy asked, "Is that a flathead V8? It sure is quiet." That's basically the sound of the engine installed hooked to the muffler - quiet.

But, just in case you missed it, here's the video of starting it up on the engine stand before it was installed. I took the video with my old video camera that isn't as good at capturing the video as it is capturing the sound better than my new camera: https://www.youtube.com/watch?v=NtDnCi6x21I

[Old Henry]

Originally Posted by Drbrown

You find some great places for overnights (no interior pictures ?). Best regards .........

That was the place I ended up with late at night after being turned away from others that wouldn't take Pepe in. Didn't really get a good look at it until morning. Was just lucky I guess.

[mfagan]

Great fun I'm sure. Glad all is well!

[Cecil/WV]

Now, it should outlast you! Great!! Then, your memory will live on.

[Ol' Ron]

I
m glad you got it running good, Now have fun and keep the shiny side up. I need those movies.
Ol' Ron

[uncle max]

Originally Posted by Old Henry

The engine isn't much to listen too installed with the muffler on. One place I stopped for gas the guy asked, "Is that a flathead V8? It sure is quiet." That's basically the sound of the engine installed hooked to the muffler - quiet.

But, just in case you missed it, here's the video of starting it up on the engine stand before it was installed. I took the video with my old video camera that isn't as good at capturing the video as it is capturing the sound better than my new camera: https://www.youtube.com/watch?v=NtDnCi6x21I

Sounds like the carburetor is vibration-free too!

[John S]

Sounds like your guys got it right the second time. I hope it gives you years of good service.

[Tinker]

And away you goooooooo.....

Hope you brought your torque wrench so you can re-torque the heads. Your only a few hundred miles away to the first cycle. . But that was yesterday!!!

Engine sounds great! Happy travels!

[Old Henry]

Originally Posted by BILL WZOREK

Henry:
Two Thumbs up.
When you have a chance go back & read all the threads / although some were sounding negative & there wanted you to rebuild it there way. It really shows how forgiving these Flatheads are , and there are many / many ways to get to the ultimate
end which is Getting on the road , keep the dirty side down & the shinny side up.

Also where is this trip taking you & Pepe ?

I did re-read all of the comments on all of the threads related to my bearing failure. The things I learned are:

Don't lug the engine
Avoid premature detonation
Avoid overly rich A/F ratio
No "hot rodding"

The better the oil the longer the bearings may last. I've switched to Mobile 1 full synthetic 10W-30 multi-vis rather than the NAPA S.A.E. 30 I have been running. And, change the oil more often since the filter does not filter all of the oil. I've been changing oil and filter every 5,000 miles. I'll probably switch to 2,500 for the oil and 5,000 for the filter.

Where there's a will there's a way. I never thought I'd get my engine fixed within two miles of where I live. But, even though the mechanics had to go through a bit of a "learning curve", I did get it fixed as well as I could have anywhere else and it now runs better than it ever has and is better than new in my opinion - guaranteeing many more happy miles and smiles.

Any other lessons I missed?