The Ford Barn

37fordman · 08-26-2010, 09:30 AM

Set of steel rear 37 Ford Pick up fenders.

BillB · 08-26-2010, 10:36 AM

There are 4 variants of rears .. this, from the EV8 '37 Ford book may be helpful.

lonewolf · 08-29-2010, 12:08 PM

he wants pickup fenders..............37 only had 1 style of pickup fenders unless you got a flatbed they had notches cut in the top...........both are hard to find and $$$$$$$$$$

oldandtired · 08-29-2010, 12:27 PM

Sponsored Links (Register now to hide all advertisements)

They are scarce as hen's teeth. A great many of the used ones have or need a patch panel where they mount to the runningboard and a great many have a split in the center of the wheel radius. A lot have tailpiece damage and it was common to find them with a piece of steel welded onto them. I have seen NOS ones from time to time for over $1000 each with that being on the low side. Where are you located? I am in SC. I am redoing both 35 and 37 pickups and have a number of friends here and there around the country who are also redoing or have pickups.

08-26-2010, 09:30 AM	#1
37fordman Junior Member Join Date: Aug 2010 Posts: 1	Wanted Set of steel rear 37 Ford Pick up fenders. Last edited by 37fordman; 08-26-2010 at 11:03 AM.

08-26-2010, 10:36 AM	#2
BillB Junior Member Join Date: Jun 2010 Location: SW MIchigan Posts: 7	Re: Wanted There are 4 variants of rears .. this, from the EV8 '37 Ford book may be helpful.

08-29-2010, 12:08 PM	#3
lonewolf Senior Member Join Date: May 2010 Location: Michigan Posts: 464	Re: Wanted he wants pickup fenders..............37 only had 1 style of pickup fenders unless you got a flatbed they had notches cut in the top...........both are hard to find and $$$$$$$$$$

08-29-2010, 12:27 PM	#4
oldandtired Senior Member Join Date: May 2010 Location: Edgefield, SC Posts: 811	Re: Wanted Sponsored Links (Register now to hide all advertisements) They are scarce as hen's teeth. A great many of the used ones have or need a patch panel where they mount to the runningboard and a great many have a split in the center of the wheel radius. A lot have tailpiece damage and it was common to find them with a piece of steel welded onto them. I have seen NOS ones from time to time for over $1000 each with that being on the low side. Where are you located? I am in SC. I am redoing both 35 and 37 pickups and have a number of friends here and there around the country who are also redoing or have pickups.