The Ford Barn

Royal Ryser · 08-31-2017, 04:25 PM

Does the 36 radiator mount in the front or rear mounting holes?
Thanks
Royal

Don Rogers · 08-31-2017, 05:15 PM

Rear holes for 36 passanger car.

Royal Ryser · 08-31-2017, 05:59 PM

Thank you, Don. I thought so, but am having trouble getting the front sheet metal to line up. Others have, too. I'll keep at it.
Royal

JM 35 Sedan · 08-31-2017, 10:37 PM

Royal, I'm thinking someone once sent me some detailed instructions on 36 Ford passenger car front end alignment. I'll take a look and see if I can come up with this if you are interested.

Royal Ryser · 08-31-2017, 11:10 PM

JM 35 Sedan, thanks for any info you might come up with. I'm pulling my hair out and have none to spare!

Rusk · 09-01-2017, 03:37 PM

Sponsored Links (Register now to hide all advertisements)

Try this...

https://fordbarn.com/forum/showthread.php?t=8199

Bryan

TagMan · 09-01-2017, 08:23 PM

After many, many frustrating hours of trying to fit the front end sheet metal on my '36 coupe, I found that small adjustments on the radiator support rods can do more than anything else to line things up perfectly. It can be done ! The guys in the factory did it in a few minutes.

08-31-2017, 04:25 PM	#1
Royal Ryser Senior Member Join Date: May 2010 Location: Colorado Posts: 553	Which holes to mount 36 tudor radiator? Does the 36 radiator mount in the front or rear mounting holes? Thanks Royal

08-31-2017, 05:15 PM	#2
Don Rogers Senior Member Join Date: May 2010 Location: Wildwood, MO. (near St. Louis) Posts: 1,792	Re: Which holes to mount 36 tudor radiator? Rear holes for 36 passanger car.

08-31-2017, 05:59 PM	#3
Royal Ryser Senior Member Join Date: May 2010 Location: Colorado Posts: 553	Re: Which holes to mount 36 tudor radiator? Thank you, Don. I thought so, but am having trouble getting the front sheet metal to line up. Others have, too. I'll keep at it. Royal

08-31-2017, 10:37 PM	#4
JM 35 Sedan Senior Member Join Date: May 2010 Location: Near Rising Sun, Maryland Posts: 10,858	Re: Which holes to mount 36 tudor radiator? Royal, I'm thinking someone once sent me some detailed instructions on 36 Ford passenger car front end alignment. I'll take a look and see if I can come up with this if you are interested. __________________ *John* *"Never give up on what you really want to do. The person with big dreams is more powerful than one with all the facts". Albert Einstein*

08-31-2017, 11:10 PM	#5
Royal Ryser Senior Member Join Date: May 2010 Location: Colorado Posts: 553	Re: Which holes to mount 36 tudor radiator? JM 35 Sedan, thanks for any info you might come up with. I'm pulling my hair out and have none to spare!

09-01-2017, 03:37 PM	#6
Rusk Senior Member Join Date: May 2010 Location: Roseville, CA Posts: 172	Re: Which holes to mount 36 tudor radiator? Sponsored Links (Register now to hide all advertisements) Try this... https://fordbarn.com/forum/showthread.php?t=8199 Bryan

09-01-2017, 08:23 PM	#7
TagMan Senior Member Join Date: Jul 2011 Location: Alvaton, Kentucky, USA Posts: 955	Re: Which holes to mount 36 tudor radiator? After many, many frustrating hours of trying to fit the front end sheet metal on my '36 coupe, I found that small adjustments on the radiator support rods can do more than anything else to line things up perfectly. It can be done ! The guys in the factory did it in a few minutes.