|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
05-11-2017, 07:29 AM | #1 |
Senior Member
Join Date: Mar 2011
Location: Mebane, NC
Posts: 188
|
Alignment Specs
Looking for front end alignment specs for my 51 Ford using radial tires.
I found some older threads where it was discussed but nobody ever posted actual specs. |
05-11-2017, 02:48 PM | #2 |
Senior Member
Join Date: May 2010
Location: Racine, WI
Posts: 472
|
Re: Alignment Specs
From the 49-51 Shop Manual
Caster: Max. 1/2 Degree, Min. -1 Degree Camber: Max. 1 Degree, Min. 0 Degree King Pin Inclination Degrees: Max. 5 3/4 Degrees, Min. 4 3/4 Degrees Toe-in Front Wheels (Inches): 1/16 to 1/8 I just set my Toe-in on my Coupe. Been doing great with radials. |
Sponsored Links (Register now to hide all advertisements) |
|
05-11-2017, 03:50 PM | #3 |
Senior Member
Join Date: Mar 2011
Location: Mebane, NC
Posts: 188
|
Re: Alignment Specs
Sponsored Links (Register now to hide all advertisements)
What are people doing about the special wrenches needed to set the caster and camber ? |
|
|
Sponsored Links (Register now to hide all advertisements) |
|