The Ford Barn

Drewstermatic · 07-13-2022, 03:46 PM

Sponsored Links (Register now to hide all advertisements)

Trying to track down a new brake springs for my 1963 Ford Fairlane. The springs in replacement hardware pack covers much of what is needed, but it is missing 1 specific spring. The spring is a 7" spring that has the middle as a straight component to allow for the cylinder to have room. Configuration is 7" long. From left to right - the hook on left accounts for 1" then a spring .5" wide then 4" straight wire to allow for room for brake cylinder - followed by .5 wide spring - followed by 1" straight wire with hook. Looks similar to below. The spring portions have 6 coils.

<---//////-------------------//////--->

If you have any idea on this and where to find one - that would be wonderful.

Andrew
[email protected]

07-13-2022, 03:46 PM	#1
Drewstermatic Junior Member Join Date: May 2022 Location: Minnesota Posts: 25	1963 Ford Fairlane Front Brake retraction spring City: Andover State: MN Sponsored Links (Register now to hide all advertisements) Trying to track down a new brake springs for my 1963 Ford Fairlane. The springs in replacement hardware pack covers much of what is needed, but it is missing 1 specific spring. The spring is a 7" spring that has the middle as a straight component to allow for the cylinder to have room. Configuration is 7" long. From left to right - the hook on left accounts for 1" then a spring .5" wide then 4" straight wire to allow for room for brake cylinder - followed by .5 wide spring - followed by 1" straight wire with hook. Looks similar to below. The spring portions have 6 coils. <---//////-------------------//////---> If you have any idea on this and where to find one - that would be wonderful. Andrew [email protected]