|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
09-22-2018, 02:39 PM | #1 |
Senior Member
Join Date: May 2010
Location: Illinois
Posts: 2,181
|
pistons for a 21 stud
Are pistons for a 36 available in a larger oversize than .060?
John Last edited by john in illinois; 09-22-2018 at 02:47 PM. |
09-22-2018, 03:33 PM | #2 |
Senior Member
Join Date: Sep 2011
Location: Christchurch New Zealand
Posts: 1,603
|
Re: pistons for a 21 stud
|
Sponsored Links (Register now to hide all advertisements) |
|
09-22-2018, 04:55 PM | #3 |
Senior Member
Join Date: May 2010
Posts: 499
|
Re: pistons for a 21 stud
An 1/8 (.125) over is 3 3/16 which is standard bore for 237 inch V-8s
|
09-22-2018, 06:04 PM | #4 |
Senior Member
Join Date: May 2010
Location: Oshkosh, Wi
Posts: 4,516
|
Re: pistons for a 21 stud
Flat top or crowned?
|
09-22-2018, 06:57 PM | #5 |
Senior Member
Join Date: May 2010
Location: Illinois
Posts: 2,181
|
Re: pistons for a 21 stud
|
09-22-2018, 10:48 PM | #6 |
Senior Member
Join Date: May 2010
Location: Oshkosh, Wi
Posts: 4,516
|
Re: pistons for a 21 stud
Sponsored Links (Register now to hide all advertisements)
|
09-23-2018, 08:36 AM | #7 |
BANNED
Join Date: May 2010
Posts: 3,019
|
Re: pistons for a 21 stud
John,
Be mindful of core shift on these early blocks. Some can go 3 3/16 + .020 like Jack just said but just as many are kaput at 3 1/16 + .060.........been there. Charlie ny |
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|