The Ford Barn

Randy in ca · 01-10-2014, 02:41 PM

Posting for a friend who may be interested in going the reproduction steel route rather than with the poor originals he has.

There seems to be many places selling these, and mostly wondering how many different manufacturers there actually are, and how they compare quality-wise, i.e. how much work they usually require. Any information, recommendations, experiences, etc. etc. would be greatly appreciated. Thanks.

Randy in ca · 01-12-2014, 11:34 AM

Bumping up. Anybody any knowledge or experience with these?

mfagan · 01-12-2014, 12:44 PM

My 34 roadster shown in avatar had fenders purchased
from Funk Fenders back in 95-96. Don't know if
they are still around or not. I purchased a front
fender from Howells out of Beamont Tx and it
Appears to be the same.

The only issue I see is the apron behind the front
wheel is not vertical like the original and the bolt
holes for running board are not punched out.

deuce lover · 01-12-2014, 12:51 PM

Contact Bobby Walden @ Walden Speed in Pomona,CA.He installed a set of the repos on a 34 3W coupe a few yrs ago.

Mike34 · 01-13-2014, 12:45 PM

Sponsored Links (Register now to hide all advertisements)

Also contact Steve's Auto Restoration in Portland, OR at http://www.stevesautorestorations.com/
Also known as Real Steel. He used to carry fenders and if he doesn't, he can certainly give you advice.

01-10-2014, 02:41 PM	#1
Randy in ca Senior Member Join Date: May 2010 Posts: 1,640	1933-34 Reproduction Fender info needed Posting for a friend who may be interested in going the reproduction steel route rather than with the poor originals he has. There seems to be many places selling these, and mostly wondering how many different manufacturers there actually are, and how they compare quality-wise, i.e. how much work they usually require. Any information, recommendations, experiences, etc. etc. would be greatly appreciated. Thanks.

01-12-2014, 11:34 AM	#2
Randy in ca Senior Member Join Date: May 2010 Posts: 1,640	Re: 1933-34 Reproduction Fender info needed Bumping up. Anybody any knowledge or experience with these?

01-12-2014, 12:44 PM	#3
mfagan Senior Member Join Date: May 2010 Location: Kaufman, TX Posts: 822	Re: 1933-34 Reproduction Fender info needed My 34 roadster shown in avatar had fenders purchased from Funk Fenders back in 95-96. Don't know if they are still around or not. I purchased a front fender from Howells out of Beamont Tx and it Appears to be the same. The only issue I see is the apron behind the front wheel is not vertical like the original and the bolt holes for running board are not punched out.

01-12-2014, 12:51 PM	#4
deuce lover Senior Member Join Date: May 2010 Location: Southern France Posts: 5,301	Re: 1933-34 Reproduction Fender info needed Contact Bobby Walden @ Walden Speed in Pomona,CA.He installed a set of the repos on a 34 3W coupe a few yrs ago.

01-13-2014, 12:45 PM	#5
Mike34 Senior Member Join Date: May 2010 Location: Massachusetts Posts: 117	Re: 1933-34 Reproduction Fender info needed Sponsored Links (Register now to hide all advertisements) Also contact Steve's Auto Restoration in Portland, OR at http://www.stevesautorestorations.com/ Also known as Real Steel. He used to carry fenders and if he doesn't, he can certainly give you advice.