Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 09-08-2020, 05:38 PM   #1
APH48
Junior Member
 
Join Date: Jun 2017
Location: Dana Point, CA
Posts: 15
Default Wiper vacuum line and windsheild installation

Can anyone tell me the procedure to install the vacuum wiper line from the inside firewall to the windshield wiper motor on a 1931 (B45) coupe. I bought a new vacuum line and it has a short 90 degree on one end and the rest is straight. Also where do the vacuum line clips secure to at the header. Are they installed before the windshield hinge or after? The hinge weather strip before or after the hinge? I'm sure these questions have been asked before but I'm sill puzzled! Thanks to all.
APH48 is offline   Reply With Quote
Old 09-09-2020, 09:12 AM   #2
1930artdeco
Senior Member
 
1930artdeco's Avatar
 
Join Date: May 2010
Location: Lynden, Wa
Posts: 3,550
Default Re: Wiper vacuum line and windsheild installation

On my sedan, I ran the tube up the pass side A pillar with the 90* bend at the top. Just bend the tube to match the contours of the body so you can mate it up with the line port in the firewall. Then I opened the windshield and installed the clips that way. Routed the rubber through the frame and to the motor.


Mike
__________________
1930 TownSedan (Briggs)
1957 Country Sedan
1930artdeco is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 09-09-2020, 09:34 AM   #3
APH48
Junior Member
 
Join Date: Jun 2017
Location: Dana Point, CA
Posts: 15
Default Re: Wiper vacuum line and windsheild installation

I think the routing on a coupe is different than the sedan, but I'm not sure of the order of installation of the windshield hinges. What goes on first to install this? The hinge, the vacuum line clips, or the hinge weather strip? Thanks for your input 1930artdeco.
APH48 is offline   Reply With Quote
Old 09-10-2020, 10:04 AM   #4
1930artdeco
Senior Member
 
1930artdeco's Avatar
 
Join Date: May 2010
Location: Lynden, Wa
Posts: 3,550
Default Re: Wiper vacuum line and windsheild installation

I am thinking a closed car is a closed car for this purpose-I could be wrong though. My windshield was already installed. That being said I would think the vacuum line would be the last part to go in.


Mike
__________________
1930 TownSedan (Briggs)
1957 Country Sedan
1930artdeco is offline   Reply With Quote
Old 09-10-2020, 07:00 PM   #5
APH48
Junior Member
 
Join Date: Jun 2017
Location: Dana Point, CA
Posts: 15
Default Re: Wiper vacuum line and windsheild installation

1930artdeco, Mike, thanks for your input.
APH48 is offline   Reply With Quote
Old 09-11-2020, 11:03 AM   #6
katy
Senior Member
 
katy's Avatar
 
Join Date: Jun 2015
Location: Red Deer, Alberta
Posts: 5,042
Default Re: Wiper vacuum line and windsheild installation

Sponsored Links (Register now to hide all advertisements)
There is some info in the judging standards, page 20-14.
__________________
If you don't hear a rumor by 10 AM, start one!.
Got my education out behind the barn!
katy is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 04:50 AM.