Correct location of tire logo on a 30-31 19" Rim

[SHEC]

Thank you for the quick response. I am leaning toward this type of install - the clear silicone being the key. The new tires are great and now we are after that special finishing touch!

Stay warm Cape Codder.

Be well -

Chris -

SHEC

[RonC]

Originally Posted by Bob Bidonde

You can't be serious re the logo location. In my opinion, there is no way that Ford wheel assemblers made any attempt to index the logo.

There were balancing marks on tires back then that were used for placing the tire in relation to the stem

[SHEC]

Further homework on the rim/tire location situation. While at the Turlock Swap Meet, I checked an older MAFCA book on judging standards. It was not specific as to location of valve, brand names, logos - etc.

The specifics came from size, rim construction, tube type etc. Wondering if the current standards are more specific?

BTW - the new tires look great and really beef up the suspension. Thank you Harvey Firestone!

Be well -

Chris

SHEC

[Jeff/Illinois]

Originally Posted by Joop

A little late maybe
Ford wanted the valve stem pointed towards the Ford scripted hubcap.


...

I'd run Firestones if today's looked like that. Nice looking tire.