|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
01-18-2013, 09:34 AM | #1 |
Senior Member
Join Date: Oct 2010
Location: Callahan Fla
Posts: 1,149
|
Wiper motor identification
I recently purchased a wiper motor off of ebay for five dollars with free shipping . I thought if nothing else I could take it apart to see how the work. The number on it is CSM 110 1. Does anyone know what that fits?
__________________
Wanted, a car with a " Dynaflex Superflowing Unijet Turbovasculator which is Syncromeshed to the Multicoil Hydrotensioned Dual vacuum Dynomometer. " |
01-18-2013, 12:51 PM | #2 |
Senior Member
Join Date: May 2010
Location: So Cal
Posts: 8,713
|
Re: Wiper motor identification
Found this on Ebay http://www.ebay.com/itm/Ford-1949-63...p2047675.l2557
Trico Vacuum Wiper Motor
Ford Parcel Delivery, 8J-85, 1949, 1950, HJ-104 1951, H2J-122 1953, P350-104", 122", P400-137", 122", P-500-130", 122", 1957, 1958, 1959, 1960, 1961 NOS New OEM Left Side Trico Vacuum Wiper Motor, CSM-110-1. This is a new Trico vacuum motor that has been on the shelf for a long time and should be taken apart and greased to make sure it runs great for a long time. We have a large selection of Trico motors and parts see our Ebay Store for other listings. Bid now on this original Trico Vacuum Motor. |
Sponsored Links (Register now to hide all advertisements) |
|
09-10-2017, 01:11 PM | #3 | |
Junior Member
Join Date: Sep 2016
Posts: 9
|
Re: Wiper motor identification
Quote:
I have no idea how to hook up the rider side as the bar has slots and fall off as it turns. How the heck do I secure this bar to work??? do you have any sketch I can use...Then I can test it and see if I need a new motor? Also...the motor has 2 vacuum fittings....I used one, the other??? |
|
09-10-2017, 01:20 PM | #4 |
Junior Member
Join Date: Sep 2016
Posts: 9
|
Re: Wiper motor identification
Sponsored Links (Register now to hide all advertisements)
I have no idea how to hook up the rider side as the bar has slots and fall off as it turns. How the heck do I secure this bar to work??? do you have any sketch I can use...Then I can test it and see if I need a new motor? Also...the motor has 2 vacuum fittings....I used one, the other??? |
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|