|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
04-11-2014, 02:00 AM | #1 |
Senior Member
Join Date: May 2010
Location: Arizona, USA
Posts: 288
|
Front license plate bracket
Well, the re-assembly of this long project is getting closer.
The newest "stump" is, what holds the front license plate bracket on my 1934 3 window? I cannot locate any extra holes in the bumper and am not about to drill any holes in the front fender. I cannot even find any pictures of where it mounts. Is there a special brace or bracket and if so, who might sell one? I tried MAC's and C and G with no success. Thank you. |
04-11-2014, 03:18 AM | #2 |
Senior Member
Join Date: May 2010
Location: Melbourne Australia.
Posts: 2,079
|
Re: Front license plate bracket
Hi there, There are four front bumper irons or brackets which mount on the two front chassis extensions. The left hand outer iron has two small 1/4" holes already drilled in it to mount the license plate bracket onto with two bolts and nuts. That's presuming you have the correct bumper bar mounting irons. 33 & 34 IRONS have diamention differences as do the bumpers themselves so you need the correct ones. Regards, Kevin.
|
Sponsored Links (Register now to hide all advertisements) |
|
04-11-2014, 03:44 AM | #3 |
Senior Member
Join Date: May 2010
Location: Melbourne Australia.
Posts: 2,079
|
Re: Front license plate bracket
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|