Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 10-07-2020, 09:48 AM   #1
rembrandt78737
Junior Member
 
Join Date: Oct 2018
Posts: 4
Default 1929 Model A Briggs Fordor Steering bracket fix

Anyone out there figure out how to use a later steering column support on a 1929 Briggs Fordor? I had to fix a tank leak due to the tank mounted steering column support and don't want to use the tank mount again. I see a fair number of posts for other body styles, but the Briggs has a different dash support. In the 29 Briggs Fordor, the tank/dash mounts under a cowling. The upper flange of the tank is unsupported by the dash support except in the middle. It also sits almost flush beside the dash support. You cannot access the top of the tank flange or the top of the dash support flange to install nuts, so even if I drilled holes in the horizontal portion of the support, all the connections would be blind. Attempting to mount the bracket further forward using a custom bracket anchored to the accessible part of the dash support does not offer sufficient clearance with the steering column. I see no way to adapt the 30 support to this car. I'm open to custom options, just curious if anyone has come up with one.
Attached Images
File Type: jpg briggs dash.jpg (29.0 KB, 33 views)
rembrandt78737 is offline   Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 06:56 PM.