Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 10-03-2020, 08:34 AM   #1
russcc
Senior Member
 
Join Date: May 2010
Posts: 2,484
Default Ford V belts - 39-38

What is the correct width V-belt that drives the pumps and generator off the crank for the '39-48 flathead ? The ones I see from NAPA are truck & bus application, and say they are 3/4" wide. You measure them and they range from .600 to .655 or a little less or more than .625 or 5/8". They seem to sit a little high on the sheaves. Thank you Fordbarners.
russcc is offline   Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 12:23 AM.