The Ford Barn

Ramjet47 · 04-07-2018, 09:13 PM

Does anyone have a photograph or drawing of the wooden frame which forms the bulkhead between the boot and the rear of the seat in a 1937 Standard Ford V8 Coup’e? I have most of the wooden parts but after taking this frame apart 40 years ago, I am now unsure now how it was originally assemled. My car was built New Zealand in 1937, from a Canadian knocked down kit.

fordscript · 04-09-2018, 04:24 AM

Sponsored Links (Register now to hide all advertisements)

I have a 37 coupe with the tudor type split-back seat. I know there are at least 2 other variations, and possibly the dividing partitions might vary. If your coupe is the same as mine, I will be able to give some help...maybe pics.

04-07-2018, 09:13 PM	#1
Ramjet47 Junior Member Join Date: Apr 2015 Location: Whitsundays, Queensland, Australia Posts: 23	37 5W Coup’e trunk boot woodwork. Does anyone have a photograph or drawing of the wooden frame which forms the bulkhead between the boot and the rear of the seat in a 1937 Standard Ford V8 Coup’e? I have most of the wooden parts but after taking this frame apart 40 years ago, I am now unsure now how it was originally assemled. My car was built New Zealand in 1937, from a Canadian knocked down kit.

04-09-2018, 04:24 AM	#2
fordscript Senior Member Join Date: May 2010 Location: Oamaru, New Zealand Posts: 403	Re: 37 5W Coup’e trunk boot woodwork. Sponsored Links (Register now to hide all advertisements) I have a 37 coupe with the tudor type split-back seat. I know there are at least 2 other variations, and possibly the dividing partitions might vary. If your coupe is the same as mine, I will be able to give some help...maybe pics.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode