The Ford Barn

ct · 02-08-2015, 07:10 AM

Can anyone tell me if the ring gear on the early multi-disc flywheel is the same as the single plate clutch flywheel ring gear?

Thanks for any assistance offered.

Tom Wesenberg · 02-08-2015, 08:26 AM

Yes, it is.

RUNNERBUN · 02-08-2015, 04:04 PM

Hi Tom, Thanks for the quick response and the good news. I appreciate it very much.

RUNNERBUN · 02-08-2015, 04:10 PM

Sponsored Links (Register now to hide all advertisements)

Tom, guess you are wandering why ct asked the question and Runnerbun is thanking you. Ct is my brother and we were logged in under my username when he posted the reply.
All the best from down under.

02-08-2015, 07:10 AM	#1
ct Junior Member Join Date: Jan 2012 Location: Queensland,Australia Posts: 10	Ring gear multi-disc flywheel Can anyone tell me if the ring gear on the early multi-disc flywheel is the same as the single plate clutch flywheel ring gear? Thanks for any assistance offered.

02-08-2015, 08:26 AM	#2
Tom Wesenberg Senior Member Join Date: May 2010 Location: Mpls, MN Posts: 27,480	Re: Ring gear multi-disc flywheel Yes, it is.

02-08-2015, 04:04 PM	#3
RUNNERBUN Senior Member Join Date: Nov 2011 Location: Queensland Australia Posts: 639	Re: Ring gear multi-disc flywheel Hi Tom, Thanks for the quick response and the good news. I appreciate it very much. __________________ Adjust your points with gentle blows of a 2 pound hammer

02-08-2015, 04:10 PM	#4
RUNNERBUN Senior Member Join Date: Nov 2011 Location: Queensland Australia Posts: 639	Re: Ring gear multi-disc flywheel Sponsored Links (Register now to hide all advertisements) Tom, guess you are wandering why ct asked the question and Runnerbun is thanking you. Ct is my brother and we were logged in under my username when he posted the reply. All the best from down under. __________________ Adjust your points with gentle blows of a 2 pound hammer

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode