The Ford Barn

36crazy · 12-27-2019, 09:46 PM

Can the factory gauge be repaired if the line to the motor has been cut? My gauge still has the liquid in it.

deuce lover · 12-28-2019, 01:19 AM

Yes.Contact John Wolf & Co in Willoughby,OH. It was a '34 dualtemp.The entire line has to be replaced and charged. Was a 2 week turn around for me.

36crazy · 12-28-2019, 07:22 AM

Thank you! I'm actually like 45 minutes from there shop!

deuce lover · 12-28-2019, 08:21 AM

My only complaint is they will replace the steel nut(for water pump port) with an aluminum unless you specify to use the original(if you have it).They didn't tell me that.I had even sent a steel nut (2 ft of my line was gone) that I cleaned which they tossed.

v8fordman · 12-28-2019, 06:17 PM

How much should one expect to pay for one?

ct1932ford · 01-14-2020, 05:44 PM

Sponsored Links (Register now to hide all advertisements)

John did a duel gauge for my roadster that needed lots of help. It came out fantastic. Not cheep, but you get what you pay for. And he did it in a couple of weeks. First picture is before. Thanks for the recommendation "deuce lover"

12-27-2019, 09:46 PM	#1
36crazy Member Join Date: Dec 2019 Location: Conneaut, Ohio Posts: 43	36 ford temperature gauge Can the factory gauge be repaired if the line to the motor has been cut? My gauge still has the liquid in it.

12-28-2019, 01:19 AM	#2
deuce lover Senior Member Join Date: May 2010 Location: Southern France Posts: 5,301	Re: 36 ford temperature gauge Yes.Contact John Wolf & Co in Willoughby,OH. It was a '34 dualtemp.The entire line has to be replaced and charged. Was a 2 week turn around for me. Last edited by deuce lover; 12-28-2019 at 11:32 PM.

12-28-2019, 07:22 AM	#3
36crazy Member Join Date: Dec 2019 Location: Conneaut, Ohio Posts: 43	Re: 36 ford temperature gauge Thank you! I'm actually like 45 minutes from there shop!

12-28-2019, 08:21 AM	#4
deuce lover Senior Member Join Date: May 2010 Location: Southern France Posts: 5,301	Re: 36 ford temperature gauge My only complaint is they will replace the steel nut(for water pump port) with an aluminum unless you specify to use the original(if you have it).They didn't tell me that.I had even sent a steel nut (2 ft of my line was gone) that I cleaned which they tossed.

12-28-2019, 06:17 PM	#5
v8fordman Senior Member Join Date: May 2010 Location: Lexington, NC Posts: 860	Re: 36 ford temperature gauge How much should one expect to pay for one?