A-5005-D Frame #6 Body Bolt Bracket Hole dimensions needed

[BRENT in 10-uh-C]

I have a 160B Fordor in the shop that does not have the #6 Body Bolt Brackets installed. As luck would have it, I do not have a 5005-D frame to get the frame hole locations for the brackets, -and I only have the 5005-A and 5005-C prints which doesn't help with this either.

I have uploaded the back section of a frame print in hopes someone could give me the exact locations of the holes in the frame for those brackets using the rear running board rivet holes as a datum reference.

TIA!!

[BRENT in 10-uh-C]

Sponsored Links (Register now to hide all advertisements)

Update, Bill U. sent me the measurements. Thanks.