Go Back   The Ford Barn > General Discussion > Late V8 (1954+)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 08-14-2021, 10:11 AM   #1
Jwawhite
Senior Member
 
Jwawhite's Avatar
 
Join Date: Nov 2016
Location: Now on the Land of Sun City West, AZ
Posts: 405
Default Wheels and Tires

Would like to convert the wheels and tires back to stock.

Coker sells the 710-15 tire with whitewall which costs, hold on, over $300, ea!
The 710-6 /15 is OEM for the 56 Station Wagon.

The Coker is of special design and ingredients, appear to be a Bias tire but is a Radial and looks original style.

I read the stock rims may not support the Radial and come apart.

Anyone with experience in buying a more reasonable tire along with wheels?

Also I've read some wheels may not be tenable for a Full Size Wheel Cover..
Jwawhite is offline   Reply With Quote
Old 08-14-2021, 02:34 PM   #2
Dobie Gillis
Senior Member
 
Dobie Gillis's Avatar
 
Join Date: May 2012
Location: Middle TN
Posts: 1,060
Default Re: Wheels and Tires

I run Diamondback radials on the Merc with the original rims and haven't had one come apart, however I can't seem to keep full disc caps or trim rings on 'em possibly due to the rims flexing with the radials. I'm considering getting new rims that are more radial friendly. Coker sells rims, too.
__________________
Often wrong but never in doubt.
Dobie Gillis is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 08-14-2021, 03:06 PM   #3
miker98038
Senior Member
 
miker98038's Avatar
 
Join Date: Mar 2013
Location: Kent, WA. Tucson, AZ
Posts: 1,373
Default Re: Wheels and Tires

I’ve got the Coker bias look radials on my roadster, 8.20 15 rear and 5.60 15 front. They drive much better than the original bias plies, balanced fine and are round. Some complain about Coker, but they’ve been fine for me. I’ve also got a couple sets of Diamond Backs, modern radial carcasses, and they’re fine.

I haven’t run full hubcaps is years, but with the narrow width of the “bias look alike” I’d be surprised if they “load” the wheels that heavy in a turn unless you’re really hot footing it.
miker98038 is offline   Reply With Quote
Old 08-14-2021, 09:25 PM   #4
Daves55Sedan
Senior Member
 
Daves55Sedan's Avatar
 
Join Date: May 2010
Location: Granite City, Illinois
Posts: 3,008
Default Re: Wheels and Tires

JWA, My '55 Courier wagon has had Coker bias ply 710X15 wide whites on it but they wear out real quick. I replaced two of them with American Classic 710x15 bias-look radials a couple years ago. I have had no problem with them, but they have the same narrow tread with as the original 710x15's and the Coker bias ply tires. No reason to have a problem with installation on the wheel. The price might make you swallow your tongue though!
Daves55Sedan is offline   Reply With Quote
Old 08-14-2021, 11:32 PM   #5
dmsfrr
Senior Member
 
dmsfrr's Avatar
 
Join Date: Aug 2012
Location: Abq, NM
Posts: 3,598
Default Re: Wheels and Tires

Unless you really want the wide whitewalls, you can get regular whitewall radials for about $75 each at most any local tire store.
The look of the narrower whitewall doesn't bug me $900 worth, esp when they age-out after 8-ish years.
Attached Images
File Type: jpg at lunch c.jpg (69.0 KB, 203 views)
dmsfrr is offline   Reply With Quote
Old 08-14-2021, 11:40 PM   #6
mercman from oz
Senior Member
 
mercman from oz's Avatar
 
Join Date: May 2012
Location: Queensland, Australia
Posts: 10,289
Default Re: Wheels and Tires

Sponsored Links (Register now to hide all advertisements)

Very nice looking 1955 Ford Thunderbird with Accessory Wire Wheel Covers.
mercman from oz is offline   Reply With Quote
Old 08-15-2021, 12:07 AM   #7
dmsfrr
Senior Member
 
dmsfrr's Avatar
 
Join Date: Aug 2012
Location: Abq, NM
Posts: 3,598
Default Re: Wheels and Tires

Quote:
Originally Posted by mercman from oz View Post
Very nice looking 1955 Ford Thunderbird with Accessory Wire Wheel Covers.
Thank you!
dmsfrr is offline   Reply With Quote
Old 08-15-2021, 11:20 AM   #8
KULTULZ
Senior Member
 
KULTULZ's Avatar
 
Join Date: Aug 2012
Location: IN A 'GALAXIE' FAR FAR AWAY
Posts: 6,413
Question Re: Wheels and Tires

Do you have a set of steel wheels?
__________________
*****

- DISCLAIMER -

The above posted information is in my opinion only (IMO) and may contain copy and paste material(s).

In addition, any above tech information is supplied in good faith. No responsibility implied or otherwise can be accepted for the way others use or interpret provided data.

Your experience(s), opinion(s) and mileage may vary.

DIAGNOSED CDO - (OCD In Correct Alphabetical Order)
KULTULZ is offline   Reply With Quote
Old 08-15-2021, 06:58 PM   #9
5851a
Senior Member
 
Join Date: Oct 2014
Location: NE Iowa
Posts: 1,661
Default Re: Wheels and Tires

Wow that color in the light. is it Vermillion? Sorry OT. That's a great looking bird.
5851a is offline   Reply With Quote
Old 08-15-2021, 07:53 PM   #10
dmsfrr
Senior Member
 
dmsfrr's Avatar
 
Join Date: Aug 2012
Location: Abq, NM
Posts: 3,598
Default Re: Wheels and Tires

Quote:
Originally Posted by 5851a View Post
Wow that color in the light. is it Vermillion? Sorry OT. ...
I think what you may be seeing is a reflection of the sky on the hood and trunk lid. It's actually a fairly generic looking red. Repainted way before I got it, very slightly darker than the original Torch Red.

Now back to the originally scheduled program....
.

Last edited by dmsfrr; 08-15-2021 at 08:07 PM.
dmsfrr is offline   Reply With Quote
Old 08-15-2021, 08:40 PM   #11
mercman from oz
Senior Member
 
mercman from oz's Avatar
 
Join Date: May 2012
Location: Queensland, Australia
Posts: 10,289
Default Re: Wheels and Tires




1955-1956 Accessory 15" Wire Wheel Covers.
They fitted on the stock 15" Steel Wheels together with the Dog Dish Hubcap, and were a popular Accessory for the 1955-1956 Ford Fairlanes and 1955-1956 Ford Thunderbirds.
mercman from oz is offline   Reply With Quote
Old 08-16-2021, 09:49 AM   #12
oldbird55
Member
 
Join Date: Mar 2013
Location: e tenn
Posts: 63
Default Re: Wheels and Tires

Don't buy coker tires get diamondbacks
oldbird55 is offline   Reply With Quote
Old 08-16-2021, 10:00 AM   #13
Jwawhite
Senior Member
 
Jwawhite's Avatar
 
Join Date: Nov 2016
Location: Now on the Land of Sun City West, AZ
Posts: 405
Default Re: Wheels and Tires

Hello Kultulz!

No, haven't yet started to look for Steel Wheels.

Interesting about Coker vs Diamond Back Tires. The less expensive model of DB may not have the original upper sidewall appearance as old school but the more expensive DB does.

I second on the T Bird!!
Jwawhite is offline   Reply With Quote
Old 08-21-2021, 01:33 AM   #14
mercman from oz
Senior Member
 
mercman from oz's Avatar
 
Join Date: May 2012
Location: Queensland, Australia
Posts: 10,289
Default Re: Wheels and Tires


Another shot of dmsfrr very nice 1955 Ford Thunderbird.
mercman from oz is offline   Reply With Quote
Old 08-21-2021, 04:49 PM   #15
5851a
Senior Member
 
Join Date: Oct 2014
Location: NE Iowa
Posts: 1,661
Default Re: Wheels and Tires

Hot dang, that's the ticket. I'm a sucker for red and white. https://th.bing.com/th/id/R.2762f6ec...pid=ImgRaw&r=0
5851a is offline   Reply With Quote
Old 08-27-2021, 04:42 PM   #16
Gene F
Senior Member
 
Gene F's Avatar
 
Join Date: Mar 2012
Location: Ohio
Posts: 1,915
Default Re: Wheels and Tires

Heck I have stock wheels and stock turbine hubcaps on my 1957 Skyliner, and I'd like to convert it over to Craggars, or Keystones some day, but everyone has me scared that they won't work/fit.
Attached Images
File Type: jpg 57 retract small pixels.JPG (44.7 KB, 85 views)
Gene F is offline   Reply With Quote
Old 08-27-2021, 06:19 PM   #17
mercman from oz
Senior Member
 
mercman from oz's Avatar
 
Join Date: May 2012
Location: Queensland, Australia
Posts: 10,289
Default Re: Wheels and Tires


Gene's 1957 Ford Skyliner.
mercman from oz is offline   Reply With Quote
Old 08-27-2021, 08:49 PM   #18
miker98038
Senior Member
 
miker98038's Avatar
 
Join Date: Mar 2013
Location: Kent, WA. Tucson, AZ
Posts: 1,373
Default Re: Wheels and Tires

Any good wheel/tire shop should have no trouble fitting the wheels you want if you’re looking for stock size replacements. Simple measurements on the stock wheel. Might wait a bit if they’re 14x5 or 5.5, but they should be available.
miker98038 is offline   Reply With Quote
Old 08-27-2021, 11:19 PM   #19
dmsfrr
Senior Member
 
dmsfrr's Avatar
 
Join Date: Aug 2012
Location: Abq, NM
Posts: 3,598
Default Re: Wheels and Tires

Quote:
Originally Posted by Gene F View Post
Heck I have stock wheels and stock turbine hubcaps on my 1957 Skyliner, and I'd like to convert it over to Craggars, or Keystones some day, but everyone has me scared that they won't work/fit.
Image 1. Measure the width, offset and backspace of the stock wheels you have. Look for aftermarket wheels close to those measurements and you should be fine, also the dia of the center hole for the hub and lug bolt circle. 5 on 4 & 1/2, (image 4)
The backspace of your wheels may be approx 3 & 1/2 to 3 & 5/8 inches.

"1957 Passenger Cars except Station Wagons, Retracts and Ranchero.
14″ X 5″ with slot openings and riveted centers, used with 14″ X 7.50 tires.
"

Image 2. On the front of the car too much backspace places the inner sidewall against the upper suspension. Damage to the tire can easily happen.
Unless you prefer all 4 wheels to fit the same you should be able to use a slightly wider wheel on the rear, with a bit more backspace. There is usually more clearance to the suspension.

Image 3. I have a set of these Torq Thrust wheels 1 inch wider than the stock wheels but a very similar offset / backspace, and I expect them to fit just fine... although without the fender skirts.
Attached Images
File Type: jpg Back Spacing offset.jpg (27.5 KB, 5 views)
File Type: jpg Ed's tire.jpg (50.9 KB, 3 views)
File Type: jpg 20210424_142111 torq thrust c.jpg (48.2 KB, 4 views)
File Type: jpg 5 lug bolt circle dia. copy.jpg (8.4 KB, 2 views)

Last edited by dmsfrr; 08-27-2021 at 11:44 PM.
dmsfrr is offline   Reply With Quote
Old 08-28-2021, 10:08 AM   #20
5851a
Senior Member
 
Join Date: Oct 2014
Location: NE Iowa
Posts: 1,661
Default Re: Wheels and Tires

I ran the 14X6 70 Torino magnum 500 type on my 58 for years. A little tight at the rear and required the use of bumper jack to allow axel to drop a little, but it wasn't a deal breaker. I always thought they looked pretty good and bolted on with no problem.
5851a is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 05:08 AM.