|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
08-29-2022, 11:57 AM | #1 |
Junior Member
Join Date: Jul 2022
Posts: 1
|
Speedo identification
I have a 1930 narrow bed pickup
Just purchased Round face speedo Numbers coming off How to identify what brand it is Nothing on outside of case Need to order new numbers but don’t know which ones to buy Any help would be appreciated Thanks Wild bill |
08-29-2022, 04:13 PM | #2 |
Senior Member
Join Date: May 2010
Location: Clinton,WA/Whidbey Island
Posts: 4,105
|
Re: Speedo identification
on back of case Stewart Warner?Welcome to VFF!!
__________________
www.whidbeymodelaclub.com |
Sponsored Links (Register now to hide all advertisements) |
|
08-30-2022, 10:10 AM | #3 |
Senior Member
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 16,436
|
Re: Speedo identification
Stewart Warner, Waltham, and Northeast types generally have little differences between them but they are interchangeable in their respective shapes. The Stewart Warner types are likely the most common but a person can find all three types on flea-pay for visual references.
Round face SW and Waltham units look similar but the Northeast has screws holding the bezel so they look different. |
08-30-2022, 02:41 PM | #4 |
Senior Member
Join Date: Jun 2015
Location: Signal Mtn, TN (SE TN)
Posts: 2,372
|
Re: Speedo identification
You’ll be better off to send it to papanick who’s on the forum here
Getting those numbers correctly can be a chore |
08-30-2022, 06:20 PM | #5 |
Senior Member
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 16,436
|
Re: Speedo identification
Sponsored Links (Register now to hide all advertisements)
Last edited by rotorwrench; 08-30-2022 at 06:26 PM. |
|
|
Sponsored Links (Register now to hide all advertisements) |
|