|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
07-30-2019, 06:42 AM | #1 |
Senior Member
Join Date: May 2010
Location: IL
Posts: 303
|
Pressurized Radiator
A recent post about banger radiators brought up a suggestion of a 4# pressurized cooling system.
What would be a recommended size/volume of the overflow tank in such a system? What would be the best location to mount the overflow tank in a regular Model A engine compartment with a hood? Thank in advance Fordbarn. Peace, Phred |
07-30-2019, 07:26 AM | #2 |
Senior Member
Join Date: May 2010
Location: Jordan, MN
Posts: 1,410
|
Re: Pressurized Radiator
Phred,
Go to Brasswork's web site: https://www.thebrassworks.net/ Look under the heading of Parts and Pieces; you will find overflow tanks. I use the 15" stainless steel in my cars. The 13" would be large enough if you have a space problem. At least one size of these same overflow tanks are available from Snyder's. I mounted one on the firewall the other I mounted on the right side of the radiator. Good Day! Last edited by Dave in MN; 07-30-2019 at 07:47 AM. |
Sponsored Links (Register now to hide all advertisements) |
|
07-30-2019, 10:55 AM | #3 |
Senior Member
Join Date: Jun 2010
Location: Temecula, CA
Posts: 4,066
|
Re: Pressurized Radiator
Good advice Dave!
|
07-30-2019, 04:42 PM | #4 |
Senior Member
Join Date: May 2010
Location: Illinois
Posts: 2,181
|
Re: Pressurized Radiator
Sponsored Links (Register now to hide all advertisements)
That was the size overflow tank I needed. John
__________________
Welcome each day |
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|