|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
07-20-2010, 07:10 AM | #1 |
Senior Member
Join Date: May 2010
Location: Reading PA
Posts: 241
|
fan belt advice
I need to put a new fan belt on my 31 town sedan. I'm running an alternator. Can anyone suggest which is the best belt to by (or a belt from a particular vendor). I see bratton's only sells one kind & Mac's has like 3 including one especially for car's with alternators. The belt on it now I think rides kind of high. Not sure where it came from. I do drive this car on the weekends but it's not a long distance tour car.
Thanks for your time. Bryan |
07-20-2010, 07:52 AM | #2 |
Senior Member
Join Date: May 2010
Location: La Verne, Ca.
Posts: 827
|
Re: fan belt advice
Most of the people I've seen running an Alternator are suggesting a Gates BX 40. Much more friendly with the smaller pulley.
|
Sponsored Links (Register now to hide all advertisements) |
|
07-20-2010, 09:37 AM | #3 |
Senior Member
Join Date: May 2010
Location: Cincinnati, Ohio
Posts: 798
|
Re: fan belt advice
Bratton's has a correct belt for the Model A. JMHO
Jack
__________________
Cincinnati, Ohio |
07-20-2010, 11:36 AM | #4 |
Senior Member
Join Date: May 2010
Location: Eastern CT
Posts: 2,732
|
Re: fan belt advice
I use the gates BX40. It has "teeth" on the inside, which allow it to make the bend around the small alternator pulley without over tightening the belt. This saves your water pump bearing.
|
07-20-2010, 08:54 PM | #5 |
Junior Member
Join Date: Jul 2010
Posts: 13
|
Re: fan belt advice
I use the Dayco 23425 Top Cog Gold Series belt from Advance Auto Parts. It has cogs on both sides, and seems to grip my alternator pulley quite well.
|
07-21-2010, 12:01 PM | #6 |
Senior Member
Join Date: May 2010
Location: Didsbury Alberta
Posts: 838
|
Re: fan belt advice
Sponsored Links (Register now to hide all advertisements)
|
07-21-2010, 02:40 PM | #7 |
Senior Member
Join Date: May 2010
Posts: 335
|
Re: fan belt advice
I just bought a belt from Bratton"s and I sent it back. It was a 44" belt. Too long even for my car all standard pulleys. I bought a 43" from NAPA and it workred fine.
|
07-27-2010, 07:51 AM | #8 |
Senior Member
Join Date: May 2010
Location: Reading PA
Posts: 241
|
Re: fan belt advice
Thanks guys.
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|