06-12-2012, 08:34 AM | #1 |
Senior Member
Join Date: May 2010
Location: ontario canada
Posts: 128
|
1936 fuel pump
i have a 36 with the steel top fuel pump the gas is gone thanks to the new fuel we have to use and the rebuild kits out there the gasket fo the top of the pump is to same what are people doing for the gasket and the small seal under the bolt on the top will a 1946 glass bowl pump fit the 36 manifold thanks mike
|
06-12-2012, 02:23 PM | #2 |
Senior Member
Join Date: May 2010
Location: ontario canada
Posts: 128
|
Re: 1936 fuel pump
bttt
|
Sponsored Links (Register now to hide all advertisements) |
|
06-12-2012, 02:27 PM | #3 |
Senior Member
|
Re: 1936 fuel pump
It will but you will need to bend the pipes some .
|
06-13-2012, 12:17 AM | #4 |
Junior Member
Join Date: Jun 2012
Posts: 4
|
Re: 1936 fuel pump
I cut my own out of gasket material.
|
06-13-2012, 06:36 AM | #5 |
Senior Member
Join Date: May 2010
Location: Near Rising Sun, Maryland
Posts: 10,856
|
Re: 1936 fuel pump
Sponsored Links (Register now to hide all advertisements)
You can use the later glass bowl fuel pump on your '36 engine. I use them on my '35's but occasionally have problems with the new gas boiling in the glass bowl when driving while outside temperature are in the 90 to 100°÷ range. There is a fix now available for that problem now however.
__________________
John "Never give up on what you really want to do. The person with big dreams is more powerful than one with all the facts". Albert Einstein Last edited by JM 35 Sedan; 06-13-2012 at 06:51 AM. |
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|