NEW Stromberg electronic dizzy

[weemark]

well last week I got my new Stromberg electronic dizzy for my '35 roadster and thought I would stick some pics of it up. its very well made and feels quite heavy, I guess no heavier than the dizzy I'm using, the Lucas commercial dizzy with no vac advance. I decided to go with the Stromberg one because parts for the lucas dizzy are getting really hard to find now and I'm not convinced the lucas dizzy is performing as it should be.

I have tried it on the car yet, need to buy some new plug leads to suit as the ones I have aren't suitable for electronic ignition. All in all though I'm really happy with it and cant wait to try it, maybe wont be driving for a while due to the weather but hopefully it wont be too long.









and on the back is the advance/retard adjustment through this screw. out the box they come with 4 degrees static advance at idle with a further 22 degrees maximum advance at 2600rpm.

[corvette8n]

Nice looking piece of equipment, let us know how well it works. Is it 6 volt or 12?

[weemark]

Originally Posted by corvette8n

Nice looking piece of equipment, let us know how well it works. Is it 6 volt or 12?

I'm using the 12v negative earth version. its very well made to be honest.

[JM 35 Sedan]

Looks nice. Keep us posted on how it works. Is it available in 6V?

[Artiki]

Got one too, Mark. It'll be going on over the winter.

[tubman]

Sponsored Links (Register now to hide all advertisements)

Maybe this is a dumb question, but who makes these? Is it "Clive", the guy who makes the carburetors, by chance?

[5851a]

https://www.oneillvintageford.co.uk/...stributor.html This is just a distributer but I see they have 6V and 12V two and three bolt styles.

[Ol' Ron]

Be interesting what the advance curve is.

[JM 35 Sedan]

Just checked the website given in post #7 and that answers my question on 6V. Now I'm wondering about cost in GBP/USD?
I'm thinking if Clive is building these, the quality will be there. JMO

[flatheadmurre]

Is there an advantage over a ford crab distributor ??

[uncle max]

Originally Posted by JM 35 Sedan

Just checked the website given in post #7 and that answers my question on 6V. Now I'm wondering about cost in GBP/USD?
I'm thinking if Clive is building these, the quality will be there. JMO

Clive is indeed building these. When considering 90% of all carburetor problems are ignition related, and vice versa, it seemed only natural to augment my role as US warranty provider for the carbs as the US warranty guy for the new distributors.
I'm thinking, as with the carbs, I'll be severely underworked...

[Jack E/NJ]

Jack E/NJ

[uncle max]

My Maytag days provided some great training!

[weemark]

Originally Posted by JM 35 Sedan

Looks nice. Keep us posted on how it works. Is it available in 6V?

John yes they are available in 6v 2 bolt and 3 bolt versions.

[weemark]

Originally Posted by Artiki

Got one too, Mark. It'll be going on over the winter.

Darren is your a 12v one too? I am waiting on some cloth covered wires coming but not sure if they will be here before Christmas.

[Ol' Ron]

f there is no vacuum advance, it's not as good as what it replaces. No Load control.

[tubman]

Originally Posted by Ol' Ron

If there is no vacuum advance, it's not as good as what it replaces. No Load control.

Good point. I don't see where it would go, at least on these pictures.

[Charlie ny]

OK Max let's get these beauties over here..........I've lobbed the ball in your court.
What a perfect vintage look......blimey !
Charlie ny

[mfirth]

Hi guys, what about a Clive made 6v electronic for an 8ba ? mike

[weemark]

Originally Posted by Ol' Ron

f there is no vacuum advance, it's not as good as what it replaces. No Load control.

Ron the Lucas dizzy I have doesn't have vacuum advance either. The Lucas unit is LV6/MT8 with a part no. of 411052.