|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
08-19-2010, 08:34 PM | #1 |
Member
Join Date: Jul 2010
Posts: 52
|
36 Sedan Vinyll Top Replacement Help
Does anyone have a cutout or drawing that shows how the top cover goes on a 36 Ford Sedan? I haven't found anything on the net that shows how it is installed...specifically, I would like to know what goes where, and what pieces are needed to replace the top. I do not have any wood bows, so if you have an old one, or can trace one on a piece of paper, I think I can build them out of oak. Mac's Auto Parts sells the material and the seal, but not the wood. I had originally thought about putting a sun roof and filling the rest of it, but I kinda think it would be better with an original top. Any ideas? Thanks in advance
|
08-20-2010, 09:34 PM | #2 |
Senior Member
Join Date: May 2010
Location: Minnesota
Posts: 1,138
|
Re: 36 Sedan Vinyll Top Replacement Help
The complete roof kit is available at www.lebaronbonney.com with instructions. Complete wood ribs for roof are available from www.fordwoodart.com at good prices compared to making your own.
Thanks. |
Sponsored Links (Register now to hide all advertisements) |
|
08-20-2010, 09:37 PM | #3 |
Member
Join Date: Jul 2010
Posts: 52
|
Re: 36 Sedan Vinyll Top Replacement Help
Sponsored Links (Register now to hide all advertisements)
thanks for the info....is that wood (or painted like wood) on the side of your car? I will certainly check on the parts..have a nice day, Al |
|
|
Sponsored Links (Register now to hide all advertisements) |
|