|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
03-10-2021, 10:14 PM | #1 |
Senior Member
Join Date: May 2010
Posts: 314
|
Dual chamber master cylinder for drum brakes
Need to replace the master cylinder on my '55 Ford. Keeping stock drum brakes. Is there any particular late '60s-early '70s dual chamber MC for drum brakes that someone can recommend that you have used in this application? I think dual chamber MCs became standard on everything around '66 or '67. I remember a '69 Dodge A-100 van and a '72 Ford pickup I had both had dual chamber MC, drum brakes all around, and no power booster. Wondering if one of those might work, or something for a mid-size Ford car of that vintage? I can do the brake line plumbing to separate front and rear brakes. I know Rambler was the first to have that feature in the early '60s.
|
03-10-2021, 11:16 PM | #2 |
Senior Member
Join Date: Oct 2011
Location: elmira,ny
Posts: 1,517
|
Re: Dual chamber master cylinder for drum brakes
I would think a 70's Mustang would work. just make sure bore is same diameter. If you have a non-power M/C now, stick with non-power M/C as the pocket in the cylinders are different between power and non-power.I don't know why a dual M/C for disc in the front wouldn't work if that's all you can find. may want to add a 10# residual in the front(disc take 2#)as some dual drum/disc M/c's have internal residual valves (2# &10#) and would have wrong RPV for front drums
|
Sponsored Links (Register now to hide all advertisements) |
|
03-11-2021, 03:07 AM | #3 | |
Senior Member
Join Date: May 2010
Location: Phoenix,AZ
Posts: 1,417
|
Re: Dual chamber master cylinder for drum brakes
Quote:
|
|
03-11-2021, 07:01 AM | #4 | ||
Senior Member
Join Date: Aug 2012
Location: IN A 'GALAXIE' FAR FAR AWAY
Posts: 6,475
|
Re: Dual chamber master cylinder for drum brakes
Quote:
If you buy a late replacement MC, it will not likely have #10 RPV(s) installed. You then must plumb in inline RPV's to both circuits.. Quote:
__________________
***** - WHY IS IT ... - ... that everything you buy in the grocery store is either wrapped in or contained in plastic but the government doesn't want you to carry it out in a plastic bag? WONDERING IN W(BY GOD)V ...
DIAGNOSED CDO - (OCD In Correct Alphabetical Order) Last edited by KULTULZ; 03-11-2021 at 08:50 AM. Reason: CRS and Advanced OCD - CDO In Correct Alphabetical Order |
||
03-11-2021, 07:06 AM | #5 | |
Senior Member
Join Date: Aug 2012
Location: IN A 'GALAXIE' FAR FAR AWAY
Posts: 6,475
|
Re: Dual chamber master cylinder for drum brakes
Quote:
BTW - That clip is available and has an important function. If I were to do a conversion today, I would find a correct take-off and have it sleeved/rebuilt. The RPV's used to come in the FORD rebuild kits.
__________________
***** - WHY IS IT ... - ... that everything you buy in the grocery store is either wrapped in or contained in plastic but the government doesn't want you to carry it out in a plastic bag? WONDERING IN W(BY GOD)V ...
DIAGNOSED CDO - (OCD In Correct Alphabetical Order) |
|
03-11-2021, 04:46 PM | #6 |
Senior Member
Join Date: May 2010
Posts: 314
|
Re: Dual chamber master cylinder for drum brakes
Sponsored Links (Register now to hide all advertisements)
|
03-12-2021, 01:35 AM | #7 |
Senior Member
Join Date: Jul 2019
Location: Southern Oregon
Posts: 782
|
Re: Dual chamber master cylinder for drum brakes
Regarding the PB MC, the main difference, is in the diameter of the piston. On most Ford's, up until at least '70, the non PB unit, had a 1" piston, the PB, had 7/8".
The smaller piston, will give you higher pressure, to the wheel cylinders but, with a little more brake pedal travel.
__________________
Frank '35 Ford Model 51 '48 Ford F3 '54 Ford Tudor Mainline |
03-12-2021, 11:17 AM | #8 | |
Senior Member
Join Date: May 2010
Location: now Kuna, Idaho
Posts: 3,779
|
Re: Dual chamber master cylinder for drum brakes
Quote:
Make sure you will have sufficient pedal travel to completely bottom out the piston(s) in the master cylinder. Check before adding the brake fluid. When you lose fluid/pressure on one side of a dual master cylinder the pedal will go almost completely to the floor before any braking action occurs. If the linkage is not engineered right, the pedal may hit the floor before the piston in the master cylinder travels far enough to apply the brakes. When all is buttoned up and bled, crack a bleeder screw loose on a rear wheel cylinder and see if you can stop (don't do this in the garage in front of your work bench!). Close the rear bleeder and repeat on the fronts. Rebleed if necessary. |
|
03-12-2021, 02:05 PM | #9 |
Senior Member
Join Date: May 2010
Location: Huntsville Al
Posts: 1,526
|
Re: Dual chamber master cylinder for drum brakes
1967 Fairlanes also had dual master cylinder drum brakes. Except the GT that had disc fronts.
__________________
Matt 24:36-41 |
03-12-2021, 06:24 PM | #10 |
Senior Member
Join Date: Apr 2014
Posts: 522
|
Re: Dual chamber master cylinder for drum brakes
It sounds like you're getting some solid leads, Lamar. I put a dual reservoir on my '54 wagon with drum brakes maybe 8-10 years ago. I don't remember where I got it, or if the '54 application will work for '55, but if you strike out on your leads, pm me and I'll try and track down the receipt, which I'm pretty sure I still have. I won't bother looking until you need the info, though.
I know I bought it as something that was marketed as an upgrade to 2 reservoir for '54 Fords, so it wasn't some crap shoot engineering effort. It's worked good over the years. |
03-13-2021, 08:35 AM | #11 |
Senior Member
Join Date: Aug 2012
Location: IN A 'GALAXIE' FAR FAR AWAY
Posts: 6,475
|
Re: Dual chamber master cylinder for drum brakes
The period DUAL RESERVOIR MC(s) you want are 1967-1973 FORD INTERMEDIATE (FAIRLANE-MUSTANG).
DRUM/DRUM and DISC/DRUM are included for availability I had the chart (from the 1965/1972 MPC), that shows application, manual/power and bore size. The text would also include info regarding the valving used in the period. I have a current computer problem(s) and will post that info as soon as I can. If you buy a current production replacement MC, it will most likely not have the RPV(s) in the outlet circuits. You will have to plumb inline valves.
__________________
***** - WHY IS IT ... - ... that everything you buy in the grocery store is either wrapped in or contained in plastic but the government doesn't want you to carry it out in a plastic bag? WONDERING IN W(BY GOD)V ...
DIAGNOSED CDO - (OCD In Correct Alphabetical Order) Last edited by KULTULZ; 03-15-2021 at 03:15 PM. Reason: 3rd Grade Spelling Level |
03-14-2021, 04:34 PM | #12 |
Senior Member
Join Date: Apr 2014
Posts: 522
|
Re: Dual chamber master cylinder for drum brakes
Lamar, I got your message, but don't think my messages are getting back to you. I can't find my receipt, but will take a pic of what I've got and send it to you. I'd bet KULTULZ's recommendation is the way to go. He's kinda the man around here. Nevertheless, I'll get a pic of what I've got to you, if I can.
|
03-15-2021, 04:37 PM | #13 |
Senior Member
Join Date: Aug 2012
Location: IN A 'GALAXIE' FAR FAR AWAY
Posts: 6,475
|
Re: Dual chamber master cylinder for drum brakes
Just a warning, beware of these so-called disc brake changeover vendors. Few seem to have full comprehension and now are supplying off-shore parts.
Case in point, this individual went to an EvilBay vendor with a four wheel manual drum pickup and talked to the guy. Said he wanted power dual reservoir drum for now but would like to add front disc later. Below are photos of what he was sold and installed- Now he has to can it and start over.
__________________
***** - WHY IS IT ... - ... that everything you buy in the grocery store is either wrapped in or contained in plastic but the government doesn't want you to carry it out in a plastic bag? WONDERING IN W(BY GOD)V ...
DIAGNOSED CDO - (OCD In Correct Alphabetical Order) Last edited by KULTULZ; 03-15-2021 at 04:43 PM. Reason: CAN'T GET ACT TOGETHER |
03-16-2021, 08:33 AM | #14 |
Junior Member
Join Date: Jul 2010
Location: Elkton, KY
Posts: 10
|
Re: Dual chamber master cylinder for drum brakes
What style residual pressure valves (rpv’s) are you using?
|
03-16-2021, 11:45 AM | #15 | |
Senior Member
Join Date: May 2010
Location: Granger (Northern) Indiana
Posts: 1,520
|
Re: Dual chamber master cylinder for drum brakes
Quote:
All he has to do is switch the lines going into the combo valve, so the secondary (smaller) rear brake M/C chamber goes between the prop valve adjuster and pressure switch, and the larger front M/C chamber goes to the front of the pressure switch with the two output ports. When front discs are installed, removal of the red 10 lb residual is all that's needed. |
|
03-16-2021, 01:02 PM | #16 | |
Senior Member
Join Date: Aug 2012
Location: IN A 'GALAXIE' FAR FAR AWAY
Posts: 6,475
|
Re: Dual chamber master cylinder for drum brakes
Quote:
All replacement MC's for that period do not include RPV(s) as later applications (1974- ) did not use an RPV and the deletion reduces inventory. You see value in what he was sold? You would modify yours or a customers car in such a manner?
__________________
***** - WHY IS IT ... - ... that everything you buy in the grocery store is either wrapped in or contained in plastic but the government doesn't want you to carry it out in a plastic bag? WONDERING IN W(BY GOD)V ...
DIAGNOSED CDO - (OCD In Correct Alphabetical Order) |
|
03-16-2021, 01:40 PM | #17 |
Senior Member
Join Date: May 2010
Location: Granger (Northern) Indiana
Posts: 1,520
|
Re: Dual chamber master cylinder for drum brakes
KULTULZ,
You're right. I somehow confused this thread with one where front discs were going to sometime replace the drums. My bad! |
03-16-2021, 02:50 PM | #18 |
Senior Member
Join Date: Aug 2012
Location: IN A 'GALAXIE' FAR FAR AWAY
Posts: 6,475
|
Re: Dual chamber master cylinder for drum brakes
You're OK ...
The buyer stated to the vendor that he was considering a disc upgrade in the future ($$$) and for now only wanted a boosted split system and instead of the vendor supplying only the correct drum system upgrade sold him a system which is totally unsafe. HEY! Anytime you see or feel I have posted something incorrect, feel free to correct. I am not proud and learn something new everyday even on older vehicles. I was starting to have self-doubt there.
__________________
***** - WHY IS IT ... - ... that everything you buy in the grocery store is either wrapped in or contained in plastic but the government doesn't want you to carry it out in a plastic bag? WONDERING IN W(BY GOD)V ...
DIAGNOSED CDO - (OCD In Correct Alphabetical Order) |
03-17-2021, 03:37 AM | #19 |
Senior Member
Join Date: Aug 2012
Location: IN A 'GALAXIE' FAR FAR AWAY
Posts: 6,475
|
Re: Dual chamber master cylinder for drum brakes
Sorry about that.
Inline (after MC) valves. They should be mounted as near the MC as possible.
__________________
***** - WHY IS IT ... - ... that everything you buy in the grocery store is either wrapped in or contained in plastic but the government doesn't want you to carry it out in a plastic bag? WONDERING IN W(BY GOD)V ...
DIAGNOSED CDO - (OCD In Correct Alphabetical Order) |
03-17-2021, 07:28 AM | #20 | |
Senior Member
Join Date: May 2010
Location: Granger (Northern) Indiana
Posts: 1,520
|
Re: Dual chamber master cylinder for drum brakes
Quote:
I have to disagree with you on the system being totally unsafe. The only thing unsafe was the incorrect M/C plumbing, as I pointed out earlier. I would have also included an adjustable proportioning valve with the intent to upgrade the front drums to discs, minimizing additional plumbing changes and costs later on. As far as the proportioning valve, turning the knob CW to fully open the valve raises the split point about 1000-1200 psi, well above the normal drum brake operating pressures-in effect bypassing any proportioning to the rear drums. |
|
03-17-2021, 11:39 AM | #21 |
Senior Member
Join Date: Aug 2012
Location: IN A 'GALAXIE' FAR FAR AWAY
Posts: 6,475
|
Re: Dual chamber master cylinder for drum brakes
We will have to agree to disagree.
No foul, no harm.
__________________
***** - WHY IS IT ... - ... that everything you buy in the grocery store is either wrapped in or contained in plastic but the government doesn't want you to carry it out in a plastic bag? WONDERING IN W(BY GOD)V ...
DIAGNOSED CDO - (OCD In Correct Alphabetical Order) |
03-17-2021, 02:14 PM | #22 |
Senior Member
Join Date: May 2010
Location: Phoenix,AZ
Posts: 1,417
|
Re: Dual chamber master cylinder for drum brakes
Seems like this has gotten a bit off track with responses, and since you are sticking with a drum to drum master cylinder this video may give you a few pointers being that the Mustang drum/drum master is used in our 50's Fords. https://www.youtube.com/watch?v=WeBDLoGQ79Q&t=71s I love this tool ! https://www.harborfreight.com/brake-...der-92924.html So when I did my brakes on my '54 it was about 108 outside in Phoenix and the garage fridge had cold PBR I somehow forgot to do the bench bleed so I thought I would turn on my compressor hook up the tool and give it a shot starting with the passenger side rear bleeder then moving to the drivers side rear and guess what ? No air and a firm pedal in less than 10 minutes went ahead and did the fronts just because all the wheels cylinders were all new and still no air and a firm pedal. A lot of guys will also convert the old Ford troublesome brake sender to a GM style that works off the pedal by fabricating a simple bracket check the 1952-59 Ford Social Group for pictures of those from the members.
Last edited by JeffB2; 03-17-2021 at 02:26 PM. |
Sponsored Links (Register now to hide all advertisements) |
|
03-17-2021, 04:46 PM | #23 |
Senior Member
Join Date: Aug 2012
Location: IN A 'GALAXIE' FAR FAR AWAY
Posts: 6,475
|
Re: Dual chamber master cylinder for drum brakes
How has this thread gotten off-track in your opinion?
__________________
***** - WHY IS IT ... - ... that everything you buy in the grocery store is either wrapped in or contained in plastic but the government doesn't want you to carry it out in a plastic bag? WONDERING IN W(BY GOD)V ...
DIAGNOSED CDO - (OCD In Correct Alphabetical Order) |
03-19-2021, 03:02 AM | #24 |
Senior Member
Join Date: May 2010
Location: Phoenix,AZ
Posts: 1,417
|
Re: Dual chamber master cylinder for drum brakes
When you start throwing prop valves and residuals into the mix which he doesn't need with a manual dual master for drums it can get confusing for some,just saying. Sometimes the KISS method is best.
|
03-19-2021, 03:20 AM | #25 |
Senior Member
Join Date: Aug 2012
Location: IN A 'GALAXIE' FAR FAR AWAY
Posts: 6,475
|
Re: Dual chamber master cylinder for drum brakes
What the insertion of that reference was intended to do is warn people of how they can be taken advantage of by unscrupulous and/or un-knowledgeable vendors.
__________________
***** - WHY IS IT ... - ... that everything you buy in the grocery store is either wrapped in or contained in plastic but the government doesn't want you to carry it out in a plastic bag? WONDERING IN W(BY GOD)V ...
DIAGNOSED CDO - (OCD In Correct Alphabetical Order) |
03-21-2021, 08:02 AM | #26 |
Senior Member
Join Date: Aug 2014
Posts: 721
|
Re: Dual chamber master cylinder for drum brakes
Sponsored Links (Register now to hide all advertisements)
|
03-21-2021, 09:07 AM | #27 |
Senior Member
Join Date: Aug 2012
Location: IN A 'GALAXIE' FAR FAR AWAY
Posts: 6,475
|
Re: Dual chamber master cylinder for drum brakes
Are you referring to DRUM/DRUM or DISC/DRUM?
__________________
***** - WHY IS IT ... - ... that everything you buy in the grocery store is either wrapped in or contained in plastic but the government doesn't want you to carry it out in a plastic bag? WONDERING IN W(BY GOD)V ...
DIAGNOSED CDO - (OCD In Correct Alphabetical Order) |
03-25-2021, 07:29 AM | #28 |
Senior Member
Join Date: Aug 2014
Posts: 721
|
Re: Dual chamber master cylinder for drum brakes
|
03-25-2021, 07:49 AM | #29 |
Senior Member
Join Date: Aug 2012
Location: IN A 'GALAXIE' FAR FAR AWAY
Posts: 6,475
|
Re: Dual chamber master cylinder for drum brakes
You are referring to what type of 'rear bias adjuster'?
__________________
***** - WHY IS IT ... - ... that everything you buy in the grocery store is either wrapped in or contained in plastic but the government doesn't want you to carry it out in a plastic bag? WONDERING IN W(BY GOD)V ...
DIAGNOSED CDO - (OCD In Correct Alphabetical Order) |
03-28-2021, 07:34 AM | #30 |
Senior Member
Join Date: Aug 2014
Posts: 721
|
Re: Dual chamber master cylinder for drum brakes
|
03-28-2021, 10:31 AM | #31 | ||
Senior Member
Join Date: Aug 2012
Location: IN A 'GALAXIE' FAR FAR AWAY
Posts: 6,475
|
Re: Dual chamber master cylinder for drum brakes
Now wait a minute ...
First you say there is no need for a PPV on a car (DRUM/DRUM I a$$-u-me), then you state you only used a distribution block. Now you are saying you are using an ADJ BIAS VALVE on your DRUM/DRUM fully opened? You have a DRUM/DRUM DUAL RESERVOIR MC upgrade? The last photo below is a FORD (Weatherhead) free-standing PDV (Pressure Differential Valve/Distribution Block of the seventies period (no PROPORTIONING/METERING VALVE). If you do not want the WARNING LAMP, don't use the circuit. EDIT - ONE MORE TIME Quote:
Quote:
Are you saying you have an early disc/drum upgrade with no valving on the street? You know, this why SEMA has to continually fight the FEDS who want to put a stop to owner repair/modifications.
__________________
***** - WHY IS IT ... - ... that everything you buy in the grocery store is either wrapped in or contained in plastic but the government doesn't want you to carry it out in a plastic bag? WONDERING IN W(BY GOD)V ...
DIAGNOSED CDO - (OCD In Correct Alphabetical Order) Last edited by KULTULZ; 03-28-2021 at 06:36 PM. Reason: CRS |
||
03-29-2021, 07:43 PM | #32 |
Senior Member
Join Date: May 2010
Location: Midland Park, NJ
Posts: 3,982
|
Re: Dual chamber master cylinder for drum brakes
He said it was wide open
__________________
48 Ford Conv 56 Tbird 54 Ford Victoria |
03-29-2021, 07:46 PM | #33 |
Senior Member
Join Date: May 2010
Location: Midland Park, NJ
Posts: 3,982
|
Re: Dual chamber master cylinder for drum brakes
If you want the skinny on what master to use, go to the experts make and sell conversion parts. Try Engineered Components Inc (ECI) in Conn. for advice. They make all kinds of kits for brake conversions.
__________________
48 Ford Conv 56 Tbird 54 Ford Victoria |
03-30-2021, 12:00 AM | #34 |
Senior Member
Join Date: Aug 2012
Location: IN A 'GALAXIE' FAR FAR AWAY
Posts: 6,475
|
Re: Dual chamber master cylinder for drum brakes
__________________
***** - WHY IS IT ... - ... that everything you buy in the grocery store is either wrapped in or contained in plastic but the government doesn't want you to carry it out in a plastic bag? WONDERING IN W(BY GOD)V ...
DIAGNOSED CDO - (OCD In Correct Alphabetical Order) |
03-30-2021, 12:07 AM | #35 | |
Senior Member
Join Date: Aug 2012
Location: IN A 'GALAXIE' FAR FAR AWAY
Posts: 6,475
|
Re: Dual chamber master cylinder for drum brakes
Quote:
That CORVETTE MC goes well with the INTERSTATE BATTERY and STANT radiator cap.
__________________
***** - WHY IS IT ... - ... that everything you buy in the grocery store is either wrapped in or contained in plastic but the government doesn't want you to carry it out in a plastic bag? WONDERING IN W(BY GOD)V ...
DIAGNOSED CDO - (OCD In Correct Alphabetical Order) |
|
03-31-2021, 07:54 AM | #36 | |
Senior Member
Join Date: Aug 2012
Location: IN A 'GALAXIE' FAR FAR AWAY
Posts: 6,475
|
Re: Dual chamber master cylinder for drum brakes
Quote:
__________________
***** - WHY IS IT ... - ... that everything you buy in the grocery store is either wrapped in or contained in plastic but the government doesn't want you to carry it out in a plastic bag? WONDERING IN W(BY GOD)V ...
DIAGNOSED CDO - (OCD In Correct Alphabetical Order) |
|
03-31-2021, 09:15 AM | #37 | |
Senior Member
Join Date: May 2010
Location: Granger (Northern) Indiana
Posts: 1,520
|
Re: Dual chamber master cylinder for drum brakes
Quote:
While most of the above info on proportioning valves is correct, the actual operation is not. Fluid is never "blocked", but is delivered based on the percentage value of the valve once the "crack point" pressure is exceeded. As for drum brakes, some proportioning could have preceded disc brakes if the earlier D.O.T. brake performance requirements had been much stricter, like those starting in the mid '70s. A good example of the possible need for a drum prop valve is when using late duo-servo rear drum brakes with obsolete non-servo front drums, something done often with old (pre-'49) Fords. Last edited by V8 Bob; 03-31-2021 at 03:31 PM. |
|
04-01-2021, 12:32 AM | #38 | |
Senior Member
Join Date: Aug 2012
Location: IN A 'GALAXIE' FAR FAR AWAY
Posts: 6,475
|
Re: Dual chamber master cylinder for drum brakes
Quote:
GM did use a PPV on some all drum applications. Makes perfect sense to me. But ABS has changed all of this. What I am trying to point out is that the ill-conceived notion that an ADJ PPV will correct all situations. That is why they are not approved for the street. Their function is race car only. Some of these so-called "BRAKE KIT SELLERS" are dangerous (IMO). INFO SOURCE BELOW - https://www.brakes-shop.com/brakeped...tioning-valves
__________________
***** - WHY IS IT ... - ... that everything you buy in the grocery store is either wrapped in or contained in plastic but the government doesn't want you to carry it out in a plastic bag? WONDERING IN W(BY GOD)V ...
DIAGNOSED CDO - (OCD In Correct Alphabetical Order) |
|
04-01-2021, 08:08 AM | #39 | |
Senior Member
Join Date: May 2010
Location: Granger (Northern) Indiana
Posts: 1,520
|
Re: Dual chamber master cylinder for drum brakes
Quote:
^^^ |
|
04-01-2021, 09:39 AM | #40 |
Senior Member
Join Date: Aug 2012
Location: IN A 'GALAXIE' FAR FAR AWAY
Posts: 6,475
|
Re: Dual chamber master cylinder for drum brakes
Originally Posted by KULTULZ
Can we agree on restricted flow as pressure increases at the knee point? No. The pressure is reduced to a percentage of master cylinder output. Has nothing to do with flow. - So a restriction in a hydraulic system will not reduce flow? What I am trying to point out is that the ill-conceived notion that an ADJ PPV will correct all situations. That is why they are not approved for the street. Their function is race car only. Using an ADJ PPV may not correct all situations, but is a better alternative to a fixed value PPV designed for an entirely different vehicle and/or brake system. - You would have to figure out the newly modified braking systems and then apply a PPV to that. The best method is to study an original application and not fall for RACE CAR ONLY SYSTEMS. ADJ K/H PPVs were used on some mid-'60s Lincolns/T-Birds - Please give me an exact example. News to me. Some of these so-called "BRAKE KIT SELLERS" are dangerous (IMO). Most have improved their "tech" over the years, although a couple still need improvement. What's more troubling to me is the lack of basic brake system knowledge obvious on most forums, especially dual systems, that have been around for almost 60 years! - AGREED! - And most of the advice given is even more puzzling and dangerous.
__________________
***** - WHY IS IT ... - ... that everything you buy in the grocery store is either wrapped in or contained in plastic but the government doesn't want you to carry it out in a plastic bag? WONDERING IN W(BY GOD)V ...
DIAGNOSED CDO - (OCD In Correct Alphabetical Order) Last edited by KULTULZ; 04-01-2021 at 09:53 AM. |
04-01-2021, 11:39 AM | #41 |
Senior Member
Join Date: May 2010
Location: Granger (Northern) Indiana
Posts: 1,520
|
Re: Dual chamber master cylinder for drum brakes
KULTULZ,
1-There is no brake fluid "flow", only very slight movement. You knew that! 2-"Studying" a modified or custom brake system to match an existing factory system's fixed value PPV doesn't include all the dynamic Hi/Co Lo/Co testing the factory (and I) had to do. I'll stay with, and will continue recommending proven adjustable PPVs thank you. 3-1965-6 Lincolns, T-Birds and Mustangs with front disc brakes. The K/H adjustable valves came in two or three different styles. 4- I hope my advice isn't included in the "puzzling and dangerous" category. |
04-01-2021, 05:23 PM | #42 | ||||
Senior Member
Join Date: Aug 2012
Location: IN A 'GALAXIE' FAR FAR AWAY
Posts: 6,475
|
Re: Dual chamber master cylinder for drum brakes
Quote:
Quote:
You can't quite grab the concept. Production braking systems. Sit up a little higher. And, you can use/recommend anything you like. Doesn't make it correct or legal, just (IMO) unless you have a FLUID DYNAMICS DIPLOMA and work for a major car company. Quote:
Let me ask again, how are they adjustable? Quote:
I don't take it as advice. You may, but I find it skeptical.
__________________
***** - WHY IS IT ... - ... that everything you buy in the grocery store is either wrapped in or contained in plastic but the government doesn't want you to carry it out in a plastic bag? WONDERING IN W(BY GOD)V ...
DIAGNOSED CDO - (OCD In Correct Alphabetical Order) |
||||
Sponsored Links (Register now to hide all advertisements) |
|
04-01-2021, 05:55 PM | #43 |
Senior Member
Join Date: May 2010
Location: Granger (Northern) Indiana
Posts: 1,520
|
Re: Dual chamber master cylinder for drum brakes
Have a nice day.
|
04-01-2021, 06:32 PM | #44 |
Senior Member
Join Date: Aug 2012
Location: IN A 'GALAXIE' FAR FAR AWAY
Posts: 6,475
|
Re: Dual chamber master cylinder for drum brakes
You too BOB ...
I am really disappointed though that you won't share with me the secret of how the KH PPV (2091) was adjustable. I bet those SHELBY BOYS would just love to gain that little secret. And, it surely would be better than 'SPINNING FOR DOLLARS' (read INCREASED INSURANCE PREMIUMS) with the so-called ADJ PPV, for which there is no real ADJ, only wild guessing without knowledgeable brake spec, pressure gauges and a suitable skid pad. And even then, there is no guarantee it will perform as described. You know, I bet that IS the reason WILDWOOD inserted that WARNING and DISCLAIMER, that being they know too it is meant for RACE CAR and not STREET CAR but would hate to lose the sales. ... sigh ... oh well ...
__________________
***** - WHY IS IT ... - ... that everything you buy in the grocery store is either wrapped in or contained in plastic but the government doesn't want you to carry it out in a plastic bag? WONDERING IN W(BY GOD)V ...
DIAGNOSED CDO - (OCD In Correct Alphabetical Order) |
04-01-2021, 08:29 PM | #45 |
Senior Member
Join Date: Nov 2016
Location: Now on the Land of Sun City West, AZ
Posts: 405
|
Re: Dual chamber master cylinder for drum brakes
I think I'll stay with the single reservoir MC drum brakes..........
|
04-02-2021, 07:19 AM | #46 | |
Senior Member
Join Date: Aug 2012
Location: IN A 'GALAXIE' FAR FAR AWAY
Posts: 6,475
|
Re: Dual chamber master cylinder for drum brakes
Sponsored Links (Register now to hide all advertisements)
Quote:
Stay away from VENDOR CANDY and you should be OK.
__________________
***** - WHY IS IT ... - ... that everything you buy in the grocery store is either wrapped in or contained in plastic but the government doesn't want you to carry it out in a plastic bag? WONDERING IN W(BY GOD)V ...
DIAGNOSED CDO - (OCD In Correct Alphabetical Order) |
|
04-02-2021, 03:40 PM | #47 | |
Senior Member
Join Date: May 2010
Location: Phoenix,AZ
Posts: 1,417
|
Re: Dual chamber master cylinder for drum brakes
Quote:
|
|
04-02-2021, 03:48 PM | #48 |
Senior Member
Join Date: May 2012
Location: Middle TN
Posts: 1,060
|
Re: Dual chamber master cylinder for drum brakes
A late '60's/early 70's Malibu drum/drum master is a near bolt on, may need to drill 1 hole in the firewall. Any dual master you get will make your pushrod a tad short, but adjustable length pushrods are available.
__________________
Often wrong but never in doubt. |
04-02-2021, 06:01 PM | #49 |
Senior Member
Join Date: Aug 2012
Location: IN A 'GALAXIE' FAR FAR AWAY
Posts: 6,475
|
Re: Dual chamber master cylinder for drum brakes
|
04-02-2021, 08:33 PM | #50 |
Senior Member
Join Date: May 2012
Location: Middle TN
Posts: 1,060
|
Re: Dual chamber master cylinder for drum brakes
It was what was immediately available locally when I needed one. It worked just fine and is still working just fine per the guy I sold the car to. Improvisation is the very soul of hot rodding.
__________________
Often wrong but never in doubt. |
04-03-2021, 07:42 AM | #51 |
Senior Member
Join Date: Aug 2012
Location: IN A 'GALAXIE' FAR FAR AWAY
Posts: 6,475
|
Re: Dual chamber master cylinder for drum brakes
Yeah, you see it in CUBA a lot also ...
__________________
***** - WHY IS IT ... - ... that everything you buy in the grocery store is either wrapped in or contained in plastic but the government doesn't want you to carry it out in a plastic bag? WONDERING IN W(BY GOD)V ...
DIAGNOSED CDO - (OCD In Correct Alphabetical Order) |
04-06-2021, 03:14 PM | #52 |
Senior Member
Join Date: May 2010
Location: Phoenix,AZ
Posts: 1,417
|
Re: Dual chamber master cylinder for drum brakes
Over the years and it still will show up on Ebay and other forums as "Corvette" master cylinder I guess calling it that makes it sound better.
|
04-06-2021, 04:06 PM | #53 | |
Senior Member
Join Date: Aug 2012
Location: IN A 'GALAXIE' FAR FAR AWAY
Posts: 6,475
|
Re: Dual chamber master cylinder for drum brakes
Quote:
What that CORVETTE STYLE ROAD RACING MC gives is confidence in the driver's ability to stab and steer so that the next time he won't go off the road. Much less, it looks good with the DIALING FOR DOLLARS supposed PPV, the INTERSTATE BATTERY, STANT radiator cap (with pull tab) and of course the ever popular EDEL CHI-COM ACL with foam insert that lights up with every backfire. OH! I forgot, also yellow plug wires and a HEI distributor cap. Pop the hood on that baby and all that will set the gang wowing.
__________________
***** - WHY IS IT ... - ... that everything you buy in the grocery store is either wrapped in or contained in plastic but the government doesn't want you to carry it out in a plastic bag? WONDERING IN W(BY GOD)V ...
DIAGNOSED CDO - (OCD In Correct Alphabetical Order) |
|
04-06-2021, 05:02 PM | #54 | |
Senior Member
Join Date: May 2010
Location: now Kuna, Idaho
Posts: 3,779
|
Re: Dual chamber master cylinder for drum brakes
Quote:
Hmmm, need to tell this to Mercury. My '67 Cougar with factory front discs had the residual check valve mounted on the floor pan directly above the rear axle! (I removed it when installing a new master with a built-in valve.) |
|
04-06-2021, 06:40 PM | #55 |
Senior Member
Join Date: Aug 2012
Location: IN A 'GALAXIE' FAR FAR AWAY
Posts: 6,475
|
Re: Dual chamber master cylinder for drum brakes
Maybe tell MERC you need a SHOP MANUAL. The valve you are referring to was the PROPORTIONING VALVE (2B091). The RESIDUAL VALVE was in the MC DRUM CIRCUIT OUTLET.
__________________
***** - WHY IS IT ... - ... that everything you buy in the grocery store is either wrapped in or contained in plastic but the government doesn't want you to carry it out in a plastic bag? WONDERING IN W(BY GOD)V ...
DIAGNOSED CDO - (OCD In Correct Alphabetical Order) |
04-06-2021, 07:15 PM | #56 |
Senior Member
Join Date: May 2010
Location: Midland Park, NJ
Posts: 3,982
|
Re: Dual chamber master cylinder for drum brakes
I thought that when Ford went to discs in the front they used a combination valve ( Proportioning and residual pressure) and no master for disc/drum setups had a residual pressure valve. Or maybe they came later???
__________________
48 Ford Conv 56 Tbird 54 Ford Victoria |
04-06-2021, 07:29 PM | #57 |
Senior Member
Join Date: Aug 2012
Location: IN A 'GALAXIE' FAR FAR AWAY
Posts: 6,475
|
Re: Dual chamber master cylinder for drum brakes
No true COMBINATION VALVE until 1971/72. They were separate before that model run.
__________________
***** - WHY IS IT ... - ... that everything you buy in the grocery store is either wrapped in or contained in plastic but the government doesn't want you to carry it out in a plastic bag? WONDERING IN W(BY GOD)V ...
DIAGNOSED CDO - (OCD In Correct Alphabetical Order) |
04-07-2021, 12:36 AM | #58 |
Senior Member
Join Date: May 2010
Location: now Kuna, Idaho
Posts: 3,779
|
Re: Dual chamber master cylinder for drum brakes
|
04-07-2021, 03:09 AM | #59 | |
Senior Member
Join Date: Aug 2012
Location: IN A 'GALAXIE' FAR FAR AWAY
Posts: 6,475
|
Re: Dual chamber master cylinder for drum brakes
Quote:
The question is, do you have a PPV on your new system? And did the replacement MC come with an internal PRV and how was the new system was plumbed?
__________________
***** - WHY IS IT ... - ... that everything you buy in the grocery store is either wrapped in or contained in plastic but the government doesn't want you to carry it out in a plastic bag? WONDERING IN W(BY GOD)V ...
DIAGNOSED CDO - (OCD In Correct Alphabetical Order) |
|
04-07-2021, 11:34 AM | #60 | |
Senior Member
Join Date: May 2010
Location: now Kuna, Idaho
Posts: 3,779
|
Re: Dual chamber master cylinder for drum brakes
Quote:
|
|
04-07-2021, 12:26 PM | #61 | |
Senior Member
Join Date: Aug 2012
Location: IN A 'GALAXIE' FAR FAR AWAY
Posts: 6,475
|
Re: Dual chamber master cylinder for drum brakes
Quote:
If the rear shoes are smaller (you would have to cipher swept area) it may explain the not needing a PPV. It is not supplying the braking force as OEM design. Is this a strip or street/strip car? But then again, you have never had to dynamite the brakes if someone runs a red light in front of you on a slick road surface ...
__________________
***** - WHY IS IT ... - ... that everything you buy in the grocery store is either wrapped in or contained in plastic but the government doesn't want you to carry it out in a plastic bag? WONDERING IN W(BY GOD)V ...
DIAGNOSED CDO - (OCD In Correct Alphabetical Order) |
|
04-08-2021, 01:21 PM | #62 | |
Senior Member
Join Date: May 2010
Location: now Kuna, Idaho
Posts: 3,779
|
Re: Dual chamber master cylinder for drum brakes
Quote:
|
|
Sponsored Links (Register now to hide all advertisements) |
|
04-08-2021, 04:40 PM | #63 |
Senior Member
Join Date: Aug 2012
Location: IN A 'GALAXIE' FAR FAR AWAY
Posts: 6,475
|
Re: Dual chamber master cylinder for drum brakes
THANX! for the info, appreciate it.
__________________
***** - WHY IS IT ... - ... that everything you buy in the grocery store is either wrapped in or contained in plastic but the government doesn't want you to carry it out in a plastic bag? WONDERING IN W(BY GOD)V ...
DIAGNOSED CDO - (OCD In Correct Alphabetical Order) |
04-22-2021, 04:48 AM | #64 | ||
Senior Member
Join Date: Aug 2012
Location: IN A 'GALAXIE' FAR FAR AWAY
Posts: 6,475
|
Re: Dual chamber master cylinder for drum brakes
Quote:
Quote:
Below are the chart(s) for the 1967-1971 dual reservoir MC (application and bore size) (FAIRLANE - MUSTANG). They originally came with the RPV(s) installed. The valves were not available from FORD separately for service but were included in their MC overhaul kits. Any current new service replacement (or possibly rebuild) will most likely not have this valve(s) installed. |
||
05-01-2021, 05:37 PM | #65 |
Senior Member
Join Date: May 2010
Location: South Orange County, Ca.
Posts: 685
|
Re: Dual chamber master cylinder for drum brakes
Jumping in late. Use something size to original and use 2 #10 res valves (I use SSSB, since Wilwood and others leak), after you check and make sure new master has no residual valves inside. My '47 I used a mid/late 60's Chrysler with a home made mount and pushrod extension (use stock rod) and my '28 had a late 60's AMC/Jeep master with home made adapter. The '47 had a 1 1/16 Bore and the new master has a 1" bore, all other parts are stock.
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|