Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 02-26-2020, 07:39 AM   #1
rockfla
Senior Member
 
rockfla's Avatar
 
Join Date: Mar 2014
Location: Jacksonville FL
Posts: 3,926
Default What's your "Go To" for a hard head?

So what is your "Go To" method for removing a "hard head"? Stud motor (not bolts) in particular......and do you find the right harder to remove than the left? Mine is "loose" in the sense of "off the deck" but will not budge beyond that. AND the more I force the back of the head the "more" the front comes off!!! It's so close BUT yet so far away.
Attached Images
File Type: jpg DB65D7D8-F9C1-4E93-81A5-20858777331E.jpg (53.1 KB, 96 views)
File Type: jpg 335C92F3-BDFD-494B-BBB1-EC4D57652DDF.jpg (45.9 KB, 95 views)
File Type: jpg 1F5CF1BB-AB15-4DA1-94AB-D67E1AF315E7.jpg (47.2 KB, 92 views)
rockfla is offline   Reply With Quote
Old 02-26-2020, 08:28 AM   #2
David J
Senior Member
 
David J's Avatar
 
Join Date: Jun 2010
Location: St Croix Falls WI
Posts: 2,080
Default Re: What's your "Go To" for a hard head?

33-34 Aluminum heads can be real stinkers about this . Yours is moving so tap it down and spray the studs with PB or whatever snake oil you prefer . Probably some buildup in the holes in the head binding on the threads .
David J is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 02-26-2020, 08:31 AM   #3
rockfla
Senior Member
 
rockfla's Avatar
 
Join Date: Mar 2014
Location: Jacksonville FL
Posts: 3,926
Default Re: What's your "Go To" for a hard head?

Quote:
Originally Posted by David J View Post
33-34 Aluminum heads can be real stinkers about this . Yours is moving so tap it down and spray the studs with PB or whatever snake oil you prefer . Probably some buildup in the holes in the head binding on the threads .
Three days of WD-40, PB Blaster & LPS 1.
rockfla is offline   Reply With Quote
Old 02-26-2020, 08:43 AM   #4
David J
Senior Member
 
David J's Avatar
 
Join Date: Jun 2010
Location: St Croix Falls WI
Posts: 2,080
Default Re: What's your "Go To" for a hard head?

So much for the easy fix . Maybe a couple shims in the center and rock it front-back ? Finesse time ?
Quote:
Originally Posted by rockfla View Post
Three days of WD-40, PB Blaster & LPS 1.
David J is offline   Reply With Quote
Old 02-26-2020, 08:55 AM   #5
JWL
Member Emeritus
 
Join Date: May 2010
Location: Fitzgerald, Georgia
Posts: 2,204
Default Re: What's your "Go To" for a hard head?

I have a couple "T" handles I can screw into the sparkplug holes which can give extra pulling power. Usually if I can get some teeter-totter action on the head it will come off.
JWL is offline   Reply With Quote
Old 02-26-2020, 09:31 AM   #6
flatheadmurre
Senior Member
 
flatheadmurre's Avatar
 
Join Date: Apr 2015
Location: Sweden
Posts: 3,045
Default Re: What's your "Go To" for a hard head?

Sponsored Links (Register now to hide all advertisements)
I cheated a notch more...one slidehammer in each outer sparkplug hole.
Slidehammers lets you both pull and push the head back down....and some rustpenetrant of choice.
flatheadmurre is offline   Reply With Quote
Old 02-26-2020, 09:38 AM   #7
oldford2
Senior Member
 
oldford2's Avatar
 
Join Date: May 2010
Location: pittsfield, MA
Posts: 2,086
Default Re: What's your "Go To" for a hard head?

I made this lifter from old spark plugs. Helps to wiggle them but be gentle so you don't damage the threads.

Same as JWL's
Attached Images
File Type: jpg head puller.jpg (28.4 KB, 69 views)
oldford2 is offline   Reply With Quote
Old 02-26-2020, 09:42 AM   #8
Fordestes
Senior Member
 
Join Date: May 2010
Posts: 884
Default Re: What's your "Go To" for a hard head?

Since you can pull it up a small amount try using wood pieces under the ends ,sides ,top and bottom of the heads , pry up alternately as in a back and forth rocking motion, wood will not damage the metal and act as leverage , a rubber mallet and with the snake oil on the studs as you are already using. and a little patience.
Fordestes is offline   Reply With Quote
Old 02-26-2020, 09:46 AM   #9
35fordtn
Senior Member
 
35fordtn's Avatar
 
Join Date: Aug 2010
Location: McMinnville, TN
Posts: 2,327
Default Re: What's your "Go To" for a hard head?

I have used hooks welded to the base of a spark plug and used a slide hammer on the hooks..

The local flathead builder here uses air wedges (never tried it myself)

https://www.grainger.com/product/453...g!572999310232!
35fordtn is offline   Reply With Quote
Old 02-26-2020, 10:01 AM   #10
rockfla
Senior Member
 
rockfla's Avatar
 
Join Date: Mar 2014
Location: Jacksonville FL
Posts: 3,926
Default Re: What's your "Go To" for a hard head?

There is NO "loose" what so ever in this head.....NONE......what "progress" you see pictured has come with "Extreme" Effort over two days....the front half "somewhat" easier than the back. AND when I say "Extreme" I am surprised as some point I haven't cracked the head. I am afraid, at this point....any negative travel (back down) will result in the same amount of effort required to get "Back" to where I am at now. I have once tried getting the head "as level" as I could BUT "any" effort to move it at that point was futile!!! What is puzzling to me is (and can be seen in my pictures) IS there in NO force applied on the front half of the head......all movement "there" has been achieved AS I have put force on and moved the back of the head??? The slide hammer suggestions are in my thoughts at this point but still open to ANY other ideas.
rockfla is offline   Reply With Quote
Old 02-26-2020, 10:01 AM   #11
Tim Ayers
Senior Member
 
Join Date: May 2010
Location: NJ
Posts: 6,143
Default Re: What's your "Go To" for a hard head?

Quote:
Originally Posted by 35fordtn View Post
I have used hooks welded to the base of a spark plug and used a slide hammer on the hooks..

The local flathead builder here uses air wedges (never tried it myself)

https://www.grainger.com/product/453...g!572999310232!
Interesting. I've seen those wedges at Home Depot in the tool isle.
Tim Ayers is offline   Reply With Quote
Old 02-26-2020, 10:01 AM   #12
Tim Ayers
Senior Member
 
Join Date: May 2010
Location: NJ
Posts: 6,143
Default Re: What's your "Go To" for a hard head?

Quote:
Originally Posted by rockfla View Post
So what is your "Go To" method for removing a "hard head"? Stud motor (not bolts) in particular......and do you find the right harder to remove than the left? Mine is "loose" in the sense of "off the deck" but will not budge beyond that. AND the more I force the back of the head the "more" the front comes off!!! It's so close BUT yet so far away.
Have you thought about making some wooden wedges to tap under the head?
Tim Ayers is offline   Reply With Quote
Old 02-26-2020, 10:13 AM   #13
JSeery
Member Emeritus
 
JSeery's Avatar
 
Join Date: Nov 2012
Location: Wichita KS
Posts: 16,132
Default Re: What's your "Go To" for a hard head?

Quote:
Originally Posted by Tim Ayers View Post
Have you thought about making some wooden wedges to tap under the head?
Like this (see original post).
Attached Images
File Type: jpg DB65D7D8-F9C1-4E93-81A5-20858777331E.jpg (53.1 KB, 60 views)
File Type: jpg 335C92F3-BDFD-494B-BBB1-EC4D57652DDF.jpg (45.9 KB, 58 views)
JSeery is offline   Reply With Quote
Old 02-26-2020, 10:30 AM   #14
Tim Ayers
Senior Member
 
Join Date: May 2010
Location: NJ
Posts: 6,143
Default Re: What's your "Go To" for a hard head?

Quote:
Originally Posted by JSeery View Post
Like this (see original post).

Haha. Hiding in plain sight
Tim Ayers is offline   Reply With Quote
Old 02-26-2020, 10:34 AM   #15
flatheadmurre
Senior Member
 
flatheadmurre's Avatar
 
Join Date: Apr 2015
Location: Sweden
Posts: 3,045
Default Re: What's your "Go To" for a hard head?

The thing is not to put a crazy amount of force on it cause whatever is binding between studs and heads will come to a point and stopp...no matter the amount of force.
Wiggle them and the crud stuck in there will come out one tiny piece each cycle...not the best meditation but it works.
flatheadmurre is offline   Reply With Quote
Old 02-26-2020, 10:35 AM   #16
rockfla
Senior Member
 
rockfla's Avatar
 
Join Date: Mar 2014
Location: Jacksonville FL
Posts: 3,926
Default Re: What's your "Go To" for a hard head?

Quote:
Originally Posted by Tim Ayers View Post
Have you thought about making some wooden wedges to tap under the head?
Not only yes BUT it is at the point that ANY more force applied to them is "peeling" the wood back!!!!
rockfla is offline   Reply With Quote
Old 02-26-2020, 11:09 AM   #17
Tim Ayers
Senior Member
 
Join Date: May 2010
Location: NJ
Posts: 6,143
Default Re: What's your "Go To" for a hard head?

Hmmm. If you have access to a torch, heat the head side around the stud holes to see if they'll enlarge enough to get past the studs.

Last edited by Tim Ayers; 02-26-2020 at 11:42 AM.
Tim Ayers is offline   Reply With Quote
Old 02-26-2020, 11:36 AM   #18
deuce_roadster
Senior Member
 
deuce_roadster's Avatar
 
Join Date: Oct 2011
Location: Shelton, WA
Posts: 3,777
Default Re: What's your "Go To" for a hard head?

I have a special very THIN hole saw like tool that just fits over the stud that goes down and cuts the aluminum oxidation that is causing the problem. This tool is made to be used by hand I think. I have never had to use it but understand how it works. The metal is about the thickness of a razor blade. Later today I will post a picture of it in my MISC album.
deuce_roadster is offline   Reply With Quote
Old 02-26-2020, 11:50 AM   #19
40 Deluxe
Senior Member
 
Join Date: May 2010
Location: now Kuna, Idaho
Posts: 3,774
Default Re: What's your "Go To" for a hard head?

Quote:
Originally Posted by deuce_roadster View Post
I have a special very THIN hole saw like tool that just fits over the stud that goes down and cuts the aluminum oxidation that is causing the problem. This tool is made to be used by hand I think. I have never had to use it but understand how it works. The metal is about the thickness of a razor blade. Later today I will post a picture of it in my MISC album.
Don't think these heads are aluminum.
40 Deluxe is offline   Reply With Quote
Old 02-26-2020, 12:10 PM   #20
deuce_roadster
Senior Member
 
deuce_roadster's Avatar
 
Join Date: Oct 2011
Location: Shelton, WA
Posts: 3,777
Default Re: What's your "Go To" for a hard head?

True, but it might work, the issue is the same. Pictures posted in MISC album. You would certainly have to go slow.
deuce_roadster is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 01:13 PM.