Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 01-15-2019, 12:22 AM   #1
Ratatat
Senior Member
 
Ratatat's Avatar
 
Join Date: May 2010
Location: Nor Cal
Posts: 364
Default Where To Buy V8 Emblem For 1936 Cabriolet

I've been looking for this V8 emblem for my 36 Club Cabriolet hood and I can't seem to find a replacement. As you can see it is held in place with two screws and is separate from the rest of the ornament.
Anybody know where I can find one?
Thanks
Attached Images
File Type: jpg IMG_5379.jpg (36.8 KB, 93 views)
File Type: jpg IMG_5382.jpg (30.0 KB, 92 views)
File Type: jpg IMG_5380.jpg (40.0 KB, 81 views)
Ratatat is offline   Reply With Quote
Old 01-15-2019, 01:08 AM   #2
Gary Tosel
Senior Member
 
Gary Tosel's Avatar
 
Join Date: May 2010
Location: Minnesota
Posts: 1,138
Default Re: Where To Buy V8 Emblem For 1936 Cabriolet

What you have is a broken hood ornament and someone made those parts to repair the broken V8. Most parts houses have replacements of the entire ornament.
Gary Tosel is online now   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 01-15-2019, 01:25 AM   #3
deuce lover
Senior Member
 
deuce lover's Avatar
 
Join Date: May 2010
Location: Southern France
Posts: 5,305
Default Re: Where To Buy V8 Emblem For 1936 Cabriolet

Here is one on EBAY.


https://www.ebay.com/itm/1936-Ford-C...NLAm:rk:2:pf:0
deuce lover is offline   Reply With Quote
Old 01-15-2019, 03:32 AM   #4
Ratatat
Senior Member
 
Ratatat's Avatar
 
Join Date: May 2010
Location: Nor Cal
Posts: 364
Default Re: Where To Buy V8 Emblem For 1936 Cabriolet

Oh, got it. Thanks!
Ratatat is offline   Reply With Quote
Old 01-27-2019, 04:00 PM   #5
Ratatat
Senior Member
 
Ratatat's Avatar
 
Join Date: May 2010
Location: Nor Cal
Posts: 364
Default Re: Where To Buy V8 Emblem For 1936 Cabriolet




NO, that's not what I have, and what I have is supposed to be original to the car.
The fourth picture is what Drake sent. Obviously it's not even close to what I have. It's not long enough and it doesn't have the provision for the dog. Also, in mine, the Ford logo is part of the ornament and is not a screw or pop out.
Anybody know whats going on?
Attached Images
File Type: jpg IMG_5475.jpg (40.0 KB, 45 views)
File Type: jpg IMG_5479.jpg (42.3 KB, 39 views)
File Type: jpg IMG_5480.jpg (31.6 KB, 42 views)
File Type: jpg IMG_5482.jpg (28.9 KB, 38 views)
File Type: jpg IMG_5484.jpg (50.2 KB, 41 views)
File Type: jpg IMG_5379.jpg (36.8 KB, 38 views)
Ratatat is offline   Reply With Quote
Old 01-27-2019, 04:41 PM   #6
deuce lover
Senior Member
 
deuce lover's Avatar
 
Join Date: May 2010
Location: Southern France
Posts: 5,305
Default Re: Where To Buy V8 Emblem For 1936 Cabriolet

Sponsored Links (Register now to hide all advertisements)
Your original ornament besides having the tips of the "V" broken off has the aftermarket greyhound mounted on it so its in 2 pieces..There should be 2 screws that fasten it to the ornament.The Drake ornament will fit.Remove the Greyhound,pop off the Ford emblem(It has a clip and snaps on). There is a screw on each side right when you lift the hood in front.Lift both sides of your hood a little more and there are 2 screws that hold the hood hinge bracket and the ornament sits under that then to the radiator.The SS trim in front will have to be tweaked a bit to get the ornament off as the tips at the emblem slip into them.It helps having an extra pair of hands.You shouldn't have to remove the hood to get the ornament off.Here is a pic of my 36 5W with a drake ornament on it.
.I sold the car 5 yrs ago.I have done this many a times




Last edited by deuce lover; 01-27-2019 at 05:04 PM.
deuce lover is offline   Reply With Quote
Old 01-27-2019, 05:16 PM   #7
Don Rogers
Senior Member
 
Don Rogers's Avatar
 
Join Date: May 2010
Location: Wildwood, MO. (near St. Louis)
Posts: 1,792
Default Re: Where To Buy V8 Emblem For 1936 Cabriolet

Here is what a typical aftermarket greyhound looks like before it is mounted to the V-8 emblem....(2) screws..look for them.
Attached Images
File Type: jpg greyhound.jpg (80.7 KB, 23 views)
Don Rogers is offline   Reply With Quote
Old 01-27-2019, 07:07 PM   #8
Ratatat
Senior Member
 
Ratatat's Avatar
 
Join Date: May 2010
Location: Nor Cal
Posts: 364
Default Re: Where To Buy V8 Emblem For 1936 Cabriolet

OK, now it's a little more clear as to whats going on.
Thanks for making it understandable.
Ratatat is offline   Reply With Quote
Old 01-28-2019, 12:03 PM   #9
blucar
Senior Member
 
blucar's Avatar
 
Join Date: Jul 2010
Location: Ventura, CA
Posts: 2,464
Default Re: Where To Buy V8 Emblem For 1936 Cabriolet

From my point of view the Grey-Hound Dog was not a very popular accessory on the '36 Fords. It was more common to see the Dog on the '33-34-35 Fords because they had an external radiator cap. The '36 ornament is much more attractive than the earlier ones and therefore don't need improvement.
The Grey-Hound was originally a Lincoln ornament from the early '30's...
__________________
Bill.... 36 5 win cpe
blucar is offline   Reply With Quote
Old 01-28-2019, 12:16 PM   #10
Don Rogers
Senior Member
 
Don Rogers's Avatar
 
Join Date: May 2010
Location: Wildwood, MO. (near St. Louis)
Posts: 1,792
Default Re: Where To Buy V8 Emblem For 1936 Cabriolet

Blucar, The 35 Ford also had a hidden radiator cap. Its also important to note that Ford of Canada supplied a Greyhound with all deluxe Fords when they introduced the new wood grained dash in mid 1936.
Attached Images
File Type: jpg greyhound.jpg (73.9 KB, 23 views)
Don Rogers is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 01:33 PM.