Choke/throttle linkage arms

[Boxhead]

Hi All,

Does anyone know if you can buy the throttle/choke linkage arms that come from the carb through the firewall and up to the dash? Mine
Are missing/trashed and i would like to buy some new ones or good condition ones that could be restored.

If they are available would anyone have a link as i cannot find them as yet.


Another i am having trouble with is, does anyone sell a reproduction fuel tank for the 42 1 1/2 T truck?


As always any help u s much appreciated

Cheers

Corey

Sent from my SM-T800 using Tapatalk

[1931 flamingo]

What year??
Should (are) be available thru C&G , Joe's, 3rd Gen Auto and others.
Paul in CT

[Boxhead]

1942 mate, i must be searching wrong, i will try again. We have a few places here in Australia which i primarily tried but couldn't find. I will try again on the US sites.

Cheers

Mate

Sent from my SM-T800 using Tapatalk

[HambBurglar]

Are these what you need? They are listed on EBay by Third Gen. Or contact them directly.

https://www.ebay.com/itm/NEW-1939-Fo...-127632-2357-0

[Boxhead]

Thanks mate,

Those are for a 39, and mine wouldn't have the sled plate i don't think. I was calling the linkage but they seem to call them a rod. I cannot seem to find any for the 42-47 trucks. I have seen a set for a 40 truck but it appears it only fits that year.

Appreciate the help

Cheers

Corey

Sent from my SM-T800 using Tapatalk

[TJ]

Sponsored Links (Register now to hide all advertisements)

For a fuel tank check with a company called "Tanks. www.tanksinc.com. I think the big truck uses the same tank as the 1/2 ton pickup.

[Boxhead]

Originally Posted by TJ

For a fuel tank check with a company called "Tanks. www.tanksinc.com. I think the big truck uses the same tank as the 1/2 ton pickup.

Thanks mate i will check them out.

Sent from my SM-T800 using Tapatalk

[Boxhead]

Hi All,

Still having no luck finding the rods for the 42 truck, anyone have v any ideas on where i might find them?

Cheers

Corey

Sent from my SM-T800 using Tapatalk

[corvette8n]

Try getting in touch with barnfind08

https://www.fordbarn.com/forum/member.php?u=104

He may have them.

[Boxhead]

Originally Posted by corvette8n

Try getting in touch with barnfind08



https://www.fordbarn.com/forum/member.php?u=104



He may have them.

Thanks mate,

I will touch base with him, have also emailed a few places macs, joes etc to see if they can assist.

Cheers

Corey

Sent from my SM-T800 using Tapatalk

[Boxhead]

Originally Posted by corvette8n

Try getting in touch with barnfind08



https://www.fordbarn.com/forum/member.php?u=104



He may have them.

Unfortunately his message inbox is full and if won't allow me to send him a message, would anyone have an email address that i could use to email him?

Cheers

Corey

Sent from my SM-T800 using Tapatalk

[HDowse]

You could try Fred at Southside Obsolete Parts. His website will get you his phone number. The website is way out of dat according to Fred.
http://www.southsideobsolete.com/southside/Welcome.html