Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 09-18-2020, 02:30 PM   #1
Old Newbie
Member
 
Old Newbie's Avatar
 
Join Date: Jan 2014
Location: Cranberry Twp., PA
Posts: 31
Default Front Fenders Hit the Shocks?

It's always another problem isn't it? Today I tried to mount the front fenders on my '31 Coupe. They line up nicely with the running boards, the splash aprons, the front fender brackets and the mounting holes on the frame; BUT they are riding on the front shocks. So much so that the hood latches are above the tie downs on the hood and there's too much pressure on the fenders. This can't be right. I have three sets of front fenders and all three sets fit the same. At least two sets are original, so it's not a repop issue. Anyone have any ideas? Can I add a spacer behind the shocks to move them out a little? I need about three quarters of an inch to be happy with the fit. Thanks to all for your ideas. Hoping someone has experienced this and has the solution.
__________________
I find the only things that are easy are the things I haven't tried!
Old Newbie is offline   Reply With Quote
Old 09-18-2020, 02:48 PM   #2
ryanheacox
Senior Member
 
ryanheacox's Avatar
 
Join Date: Apr 2013
Location: Northwest CT
Posts: 1,092
Default Re: Front Fenders Hit the Shocks?

Pictures would definitely help. You're using the stock Houdaille shocks?
ryanheacox is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 09-18-2020, 03:10 PM   #3
d.j. moordigian
Senior Member
 
d.j. moordigian's Avatar
 
Join Date: May 2010
Location: Fresno, Ca.
Posts: 3,636
Default Re: Front Fenders Hit the Shocks?

Uh,....do you have the shocks on upside down?
I've seen it done...
d.j. moordigian is offline   Reply With Quote
Old 09-18-2020, 09:23 PM   #4
Bill G
Senior Member
 
Bill G's Avatar
 
Join Date: Jun 2017
Location: Walla Walla, WA
Posts: 1,044
Default Re: Front Fenders Hit the Shocks?

Original style shocks?
Bill G is offline   Reply With Quote
Old 09-18-2020, 10:30 PM   #5
Old Newbie
Member
 
Old Newbie's Avatar
 
Join Date: Jan 2014
Location: Cranberry Twp., PA
Posts: 31
Default Re: Front Fenders Hit the Shocks?

Yes, they are original round shocks. Can’t spell the right word. Can’t take photos now ‘cause I’m out of the state. The comment about being upside down is intriguing. I didn’t mount them, they were already on the chassis but I’ll check that first thing on my return. Never thought to check that. Thanks to all so far.
__________________
I find the only things that are easy are the things I haven't tried!
Old Newbie is offline   Reply With Quote
Old 09-19-2020, 07:12 AM   #6
Ray64
Senior Member
 
Ray64's Avatar
 
Join Date: May 2010
Location: Grafton,OHIO
Posts: 727
Default Re: Front Fenders Hit the Shocks?

Sponsored Links (Register now to hide all advertisements)
if it makes a a difference there are a right front and left rear set also a left front and right rear set could be mixed up
Ray64 is offline   Reply With Quote
Old 09-19-2020, 07:52 AM   #7
Joop
Senior Member
 
Joop's Avatar
 
Join Date: May 2010
Location: Glendale, AZ
Posts: 2,939
Default Re: Front Fenders Hit the Shocks?

.
This is my car there really close

If these are the shocks you have on it you may need very thick webbing material on the frame to lift the fenders
Attached Images
File Type: jpg 0AC007DF-655B-434A-897A-2BF2676BA8FF.jpg (26.8 KB, 146 views)
File Type: jpeg DB51F67A-79B9-42B6-9B4E-C5A88E9F787A.jpeg (90.3 KB, 143 views)
Joop is offline   Reply With Quote
Old 09-19-2020, 08:00 AM   #8
jw hash
Senior Member
 
jw hash's Avatar
 
Join Date: May 2010
Location: Auburn Washington
Posts: 2,550
Default Re: Front Fenders Hit the Shocks?

something tell me the shocks might assembled wrong. and mounted upside down. the bolt pattern is off set.
jw hash is offline   Reply With Quote
Old 09-19-2020, 08:24 AM   #9
rotorwrench
Senior Member
 
rotorwrench's Avatar
 
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 16,367
Default Re: Front Fenders Hit the Shocks?

I don't think the shock itself lends itself to problematic assembly procedures but a person needs to observe right and left insallations in correct placement on the frame. There should not be any metal of the shock body above the top frame rail. A right front shock also fits the left rear and so on.
rotorwrench is offline   Reply With Quote
Old 09-19-2020, 08:35 AM   #10
100IH
Senior Member
 
Join Date: Dec 2011
Location: SW Idaho
Posts: 970
Default Re: Front Fenders Hit the Shocks?

So, the drain plug is actually a fill plug.
100IH is offline   Reply With Quote
Old 09-19-2020, 09:04 AM   #11
dlfrisch
Senior Member
 
dlfrisch's Avatar
 
Join Date: Feb 2014
Location: Florida - 32128
Posts: 416
Default Re: Front Fenders Hit the Shocks?

I can’t help with your situation, but I have front two fenders with the spare tire wells - I want to replace them with straight on fenders (no wells).
Do you have two good front fenders for my 1928 Sport Coupe, that you may want to sell or make a trade for my two good fenders ? [email protected]
dlfrisch is offline   Reply With Quote
Old 09-19-2020, 10:36 AM   #12
Old Newbie
Member
 
Old Newbie's Avatar
 
Join Date: Jan 2014
Location: Cranberry Twp., PA
Posts: 31
Default Re: Front Fenders Hit the Shocks?

I won’t be back home until Monday, then I’ll take photos. They are mounted right side up. I can tell that from the above photo. They definitely reach above the frame though. I thought of just shimming up the fenders, but that doesn’t solve the hood latch issues and I’m afraid it would stress the fenders too much. Is there a way to tell if they are original. I measured them against an old rusty set of originals and they seem the same.
__________________
I find the only things that are easy are the things I haven't tried!
Old Newbie is offline   Reply With Quote
Old 09-19-2020, 10:40 AM   #13
Old Newbie
Member
 
Old Newbie's Avatar
 
Join Date: Jan 2014
Location: Cranberry Twp., PA
Posts: 31
Default Re: Front Fenders Hit the Shocks?

Dlfrish, these are 31 fenders. I do have one ‘28 passenger side front fender but I wouldn’t call it good. It’s rusty with a small tear in the front bead. Probably not worth the shipping expense.
__________________
I find the only things that are easy are the things I haven't tried!
Old Newbie is offline   Reply With Quote
Old 09-19-2020, 04:06 PM   #14
Joop
Senior Member
 
Joop's Avatar
 
Join Date: May 2010
Location: Glendale, AZ
Posts: 2,939
Default Re: Front Fenders Hit the Shocks?

As we awaiting pictures of the car and shocks a Question:

Are the shocks rebuild? and if so maybe incorrect put back together as JW Hash
indicated maybe oil filler hole on the wrong side. I guess we will know on Monday.

Last edited by Joop; 09-19-2020 at 04:13 PM.
Joop is offline   Reply With Quote
Old 09-19-2020, 05:38 PM   #15
rotorwrench
Senior Member
 
rotorwrench's Avatar
 
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 16,367
Default Re: Front Fenders Hit the Shocks?

Ford used Who-Die shocks for many years so there could be different shocks on the vehicle. Many of the later shocks after 1932 have different mounting hole configurations. There were also aftermarket replacements back in the day that weren't made by Houdaille. Then there are the friction type aftermarket shocks. There are different arms for all the different shocks as well.

A photo or digital image of the installation should help clear things up.
rotorwrench is offline   Reply With Quote
Old 09-19-2020, 05:50 PM   #16
dlfrisch
Senior Member
 
dlfrisch's Avatar
 
Join Date: Feb 2014
Location: Florida - 32128
Posts: 416
Default Re: Front Fenders Hit the Shocks?

Thank’s for the ans. back.
dlfrisch is offline   Reply With Quote
Old 09-21-2020, 12:00 PM   #17
Old Newbie
Member
 
Old Newbie's Avatar
 
Join Date: Jan 2014
Location: Cranberry Twp., PA
Posts: 31
Default Re: Front Fenders Hit the Shocks?

Gentlemen, Thanks for all the replies so far. I am attaching the promised photos, one showing the driver's side fender attached and sitting on the shock, one showing the passenger side shock as positioned minus the fender. It's difficult to read the yardstick in the photo but the top of the shock is sitting about three quarters of an inch above the top frame rail. If it helps, I did notice that the fill plug on both sides is on the front top of each shock. Thanks again for your help!
Attached Images
File Type: jpg IMG_0031.jpg (53.9 KB, 132 views)
File Type: jpg IMG_0034.jpg (46.6 KB, 117 views)
__________________
I find the only things that are easy are the things I haven't tried!
Old Newbie is offline   Reply With Quote
Old 09-21-2020, 12:21 PM   #18
Tacoma Bob
Senior Member
 
Tacoma Bob's Avatar
 
Join Date: May 2010
Location: Tacoma, WA
Posts: 1,025
Default Re: Front Fenders Hit the Shocks?

I think post #3 is the winner. Looks upside down to me too.
Tacoma Bob is offline   Reply With Quote
Old 09-21-2020, 12:25 PM   #19
warhorseracing
Member
 
warhorseracing's Avatar
 
Join Date: Jul 2020
Location: Cameron WV
Posts: 59
Default Re: Front Fenders Hit the Shocks?

^^^^^I am going to say that they have been rebuilt and assembled wrong. In other words the fill hole should have been indexed 180 Degrees from where it is. Were they ever hooked up and have you ever had the fenders on before now? They would work in their current state without fenders but will need corrected before attaching the fenders.
warhorseracing is offline   Reply With Quote
Old 09-21-2020, 02:39 PM   #20
Bob C
Senior Member
 
Join Date: May 2010
Location: So Cal
Posts: 8,711
Default Re: Front Fenders Hit the Shocks?

Your going to have trouble mounting the fenders even when you get the shocks
corrected. You need to get rid of the hex head bolts on the front cross member
and at least use flat head bolts.
Bob C is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 06:54 AM.