The Ford Barn

Ramjet47 · 10-18-2018, 12:16 AM

I am looking for a RHD wiring loom, dash and lights, for my 37 coup�e. Will a LHD loom connect up Ok?

Brian · 10-18-2018, 02:05 AM

No...The headlight loom from lightswitch to lights will be ok, but wiring up under dash on main loom will be too short.
There is some outfit in Oz that makes nice braided replacement RHD looms

koates · 10-18-2018, 03:59 AM

VINTAGE WIRING HARNESS in Ringwood (Melbourne) Victoria. They make very nice braided wiring looms and would be able to do a RHD 37 Ford. Google them. Regards, Kevin.

Ramjet47 · 10-19-2018, 05:59 AM

Sponsored Links (Register now to hide all advertisements)

Thank you Brian and Kevin on your reply to my question on a RHD loom for my 37 coup�e, I have ordered a complete loom from Paul at Vintage Wiring Looms today, www.vinwire.com.au. Paul was very easy to work with and offered to include turn indicator wiring and an electric fuel pump feed in the loom he will build for my restoration, all with cotton bound wire to original specs.
Regards to all at the Ford Barn,
Roger Carter.

10-18-2018, 12:16 AM	#1
Ramjet47 Junior Member Join Date: Apr 2015 Location: Whitsundays, Queensland, Australia Posts: 23	1937 Wiring Harness rhd I am looking for a RHD wiring loom, dash and lights, for my 37 coup�e. Will a LHD loom connect up Ok?

10-18-2018, 02:05 AM	#2
Brian Senior Member Join Date: May 2010 Location: Masterton, New Zealand Posts: 2,964	Re: 1937 Wiring Harness rhd No...The headlight loom from lightswitch to lights will be ok, but wiring up under dash on main loom will be too short. There is some outfit in Oz that makes nice braided replacement RHD looms __________________ Unfortunately, two half wits don't make a whole wit!

10-18-2018, 03:59 AM	#3
koates Senior Member Join Date: May 2010 Location: Melbourne Australia. Posts: 1,719	Re: 1937 Wiring Harness rhd VINTAGE WIRING HARNESS in Ringwood (Melbourne) Victoria. They make very nice braided wiring looms and would be able to do a RHD 37 Ford. Google them. Regards, Kevin.

10-19-2018, 05:59 AM	#4
Ramjet47 Junior Member Join Date: Apr 2015 Location: Whitsundays, Queensland, Australia Posts: 23	Re: 1937 Wiring Harness rhd Sponsored Links (Register now to hide all advertisements) Thank you Brian and Kevin on your reply to my question on a RHD loom for my 37 coup�e, I have ordered a complete loom from Paul at Vintage Wiring Looms today, www.vinwire.com.au. Paul was very easy to work with and offered to include turn indicator wiring and an electric fuel pump feed in the loom he will build for my restoration, all with cotton bound wire to original specs. Regards to all at the Ford Barn, Roger Carter.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode