Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 08-19-2016, 11:53 AM   #1
swo4rd
Senior Member
 
swo4rd's Avatar
 
Join Date: Jun 2011
Location: Charlottesville, Virginia
Posts: 364
Default Interior trim fasteners

Are there schedules for the location and placement of all the fasteners for the interior trim for any Ford models or years?
swo4rd is offline   Reply With Quote
Old 08-19-2016, 12:09 PM   #2
msmaron
Senior Member
 
msmaron's Avatar
 
Join Date: May 2010
Location: Wauconda, IL
Posts: 3,600
Send a message via AIM to msmaron
Default Re: Interior trim fasteners

schedules???? There are drawing you can obtain from the Benson research if you seek them.
__________________
Mark Maron
Ill., Region MARC & MAFCA
MARC JSC Member MAFFI Trustee
National Facebook Admin.
https://www.facebook.com/groups/MARC.group/

A7191-Sport Coupe
29 Roadster
29-Town Sedan
29-Original Special Coupe
msmaron is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 08-19-2016, 10:32 PM   #3
swo4rd
Senior Member
 
swo4rd's Avatar
 
Join Date: Jun 2011
Location: Charlottesville, Virginia
Posts: 364
Default Re: Interior trim fasteners

Thanks Mark..actually, I just googled the request and there are numerous inquiries made about such a schedule, and the answer that I don't want to see is "it doesn't exist". I do have Ford Model A STANDARD HARDWARE 1928 - 1931 Bolts, Screws, Nuts and Washers by Mick Isbell which is necessary, but not what I need. I also have contemporary parts catalogues and that will be my next stop. I am looking for a "schedule" which in engineering terms, is a list of the pieces that make and assembly, a description of each piece in engineering terms, where they go and any unusual methods for installing/use/whatever. I can see that Steve Plucker asked about such a schedule in 2010 and that there were several experienced and knowledgeable responses, but the end is that what we need and what I am looking for is the schedule. So there, I've answered my own query...
swo4rd is offline   Reply With Quote
Old 08-19-2016, 10:47 PM   #4
swo4rd
Senior Member
 
swo4rd's Avatar
 
Join Date: Jun 2011
Location: Charlottesville, Virginia
Posts: 364
Default Re: Interior trim fasteners

Sponsored Links (Register now to hide all advertisements)
Incidentally, Kevin in NJ made one of the more profound and true statements in this string: http://www.fordbarn.com/forum/showthread.php?t=118863 which is the strongest string on the subject. I would have found it all sooner had the fordbarn search engine not been so difficult...Google does the job.
Kevin makes a point that original fasteners are the only way to go in a good restoration and necessary to get on the Fine Point Floor. I have recently bought three collections of nuts, bolts, screws, washers or all sorts that are all OEM and it is amazing how they fit, work and look like they are supposed to. Thanks Kevin.
swo4rd is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 10:47 AM.