The Ford Barn

larry/Texas · 02-14-2011, 10:35 AM

Can someone tell me the diameter of the wheel bearing race on the rear end bells. I have looked thru all of my books and cannot find it. The only diameter I can find is the roller bearing itself in the vendor books. It is for a 33 tudor. I understand the to dimension is probably the same beginning with the model A.

Thanks for your help.

JM 35 Sedan · 02-14-2011, 10:48 AM

Here's what I have in my files:
1. Factory drawings for late 32 - 34 show the OD as 2.061" (min), 2.0635" (max).
2. Another person said: 2.0625" diameter nominal

Ed Solari · 02-15-2011, 09:53 AM

Sponsored Links (Register now to hide all advertisements)

The best info I could find and seems toagree with measurements in the field

Axle bell housing race...factory 2.061 to 2.063 ... max. additional wear allowed is minus 5 mils

Race inside of wheel hub is factory 3.188 to 3.190 max. additional wear allowed is plus 5 mils

Ed

02-14-2011, 10:35 AM	#1
larry/Texas Senior Member Join Date: May 2010 Location: Houston, TX area Posts: 150	Wheel bearing race diameter Can someone tell me the diameter of the wheel bearing race on the rear end bells. I have looked thru all of my books and cannot find it. The only diameter I can find is the roller bearing itself in the vendor books. It is for a 33 tudor. I understand the to dimension is probably the same beginning with the model A. Thanks for your help.

02-14-2011, 10:48 AM	#2
JM 35 Sedan Senior Member Join Date: May 2010 Location: Near Rising Sun, Maryland Posts: 10,859	Re: Wheel bearing race diameter Here's what I have in my files: 1. Factory drawings for late 32 - 34 show the OD as 2.061" (min), 2.0635" (max). 2. Another person said: 2.0625" diameter nominal __________________ *John* *"Never give up on what you really want to do. The person with big dreams is more powerful than one with all the facts". Albert Einstein*

02-15-2011, 09:53 AM	#3
Ed Solari Senior Member Join Date: May 2010 Posts: 217	Re: Wheel bearing race diameter Sponsored Links (Register now to hide all advertisements) The best info I could find and seems toagree with measurements in the field Axle bell housing race...factory 2.061 to 2.063 ... max. additional wear allowed is minus 5 mils Race inside of wheel hub is factory 3.188 to 3.190 max. additional wear allowed is plus 5 mils Ed