|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
11-13-2011, 07:35 PM | #1 |
Senior Member
Join Date: May 2010
Location: Irving, Texas
Posts: 598
|
Comparison of Ford and Edelbrock Aluminum Heads
Here is a comparison of a NOS Ford 21 stud aluminum head with the new Edelbrock head that is going on my 46 engine. I think the compression on the Ford head was about 6 to 1 and the Edelbrock is about 8 to 1. Ed
|
11-13-2011, 08:28 PM | #2 |
Senior Member
Join Date: May 2010
Location: East Shore of LAKE HOUSTON
Posts: 11,108
|
Re: Comparison of Ford and Edelbrock Aluminum Heads
An EDELBROCK 24 stud head. DD
|
Sponsored Links (Register now to hide all advertisements) |
|
11-13-2011, 08:48 PM | #3 |
Senior Member
Join Date: May 2010
Location: NorCal
Posts: 2,617
|
Re: Comparison of Ford and Edelbrock Aluminum Heads
I like the original stuff better. Here's a picture of my NOS heads before the final polishing was done
Last edited by Kahuna; 11-13-2011 at 09:06 PM. |
11-13-2011, 09:05 PM | #4 |
Senior Member
Join Date: May 2010
Location: Napier, New Zealand
Posts: 2,001
|
Re: Comparison of Ford and Edelbrock Aluminum Heads
|
11-13-2011, 09:07 PM | #5 |
Senior Member
Join Date: May 2010
Location: NorCal
Posts: 2,617
|
Re: Comparison of Ford and Edelbrock Aluminum Heads
Well, Thanks Bassman
|
11-13-2011, 09:12 PM | #6 |
Senior Member
Join Date: May 2010
Location: new zealand
Posts: 1,054
|
Re: Comparison of Ford and Edelbrock Aluminum Heads
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|