Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 07-22-2015, 01:04 PM   #1
lnvmyrick
Junior Member
 
lnvmyrick's Avatar
 
Join Date: Jan 2014
Location: Paradise, California
Posts: 28
Default 1931 RPU frame number

Where and how do I find and locate the frame number for CHP in California?
lnvmyrick is offline   Reply With Quote
Old 07-22-2015, 01:19 PM   #2
COOTER
Senior Member
 
Join Date: May 2010
Location: Ontario, CA
Posts: 187
Default Re: 1931 RPU frame number

Top side, driver's side frame rail, under the cowl.
COOTER is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 07-22-2015, 01:58 PM   #3
C26Pinelake
BANNED
 
Join Date: May 2010
Location: Michigan / Ontario border, Sarnia, Ontario. 50 miles from Detroit and 150 from Toronto.
Posts: 5,800
Default Re: 1931 RPU frame number

Quote:
Originally Posted by COOTER View Post
Top side, driver's side frame rail, under the cowl.
That is exactly where mine is. Wayne
C26Pinelake is offline   Reply With Quote
Old 07-22-2015, 02:06 PM   #4
Charlie Stephens
Senior Member
 
Join Date: May 2010
Location: Southern California
Posts: 7,030
Default Re: 1931 RPU frame number

Quote:
Originally Posted by COOTER View Post
Top side, driver's side frame rail, under the cowl.
You should have added that "under the cowl" means lifting the body. If the engine number matches the registration they may let you use that for proof of ownership and then attached a tag to the door jam. Search the archives and you will find a picture showing the exact location (or reference to a site with pictures). FYI, I have a '31 RPU also.

Charlie Stephens

Last edited by Charlie Stephens; 07-22-2015 at 03:14 PM.
Charlie Stephens is offline   Reply With Quote
Old 07-22-2015, 02:34 PM   #5
Idaho Brett
Member
 
Idaho Brett's Avatar
 
Join Date: Oct 2013
Posts: 46
Default Re: 1931 RPU frame number

I found a picture that might help.

Idaho Brett is offline   Reply With Quote
Old 07-22-2015, 04:54 PM   #6
lnvmyrick
Junior Member
 
lnvmyrick's Avatar
 
Join Date: Jan 2014
Location: Paradise, California
Posts: 28
Default Re: 1931 RPU frame number

Sponsored Links (Register now to hide all advertisements)
How much work is lifting the body enough to see the number?
lnvmyrick is offline   Reply With Quote
Old 07-22-2015, 06:33 PM   #7
Indiana A. Lover
Senior Member
 
Join Date: Sep 2014
Location: Brook, Indiana
Posts: 214
Send a message via Yahoo to Indiana A. Lover
Default Re: 1931 RPU frame number

I do not want to be a bearer of bad news, but the numbers are very hard to read most of the time.I have had no luck reading numbers with just lifting the body. Be prepared to lift body clear of frame and clean and document with rubbing paper and lead pencil. also take photo and have it notery public stamp it. Well good luck you only have to do it one time Don in Indiana
Indiana A. Lover is offline   Reply With Quote
Old 07-22-2015, 11:59 PM   #8
Charlie Stephens
Senior Member
 
Join Date: May 2010
Location: Southern California
Posts: 7,030
Default Re: 1931 RPU frame number

Quote:
Originally Posted by Indiana A. Lover View Post
I do not want to be a bearer of bad news, but the numbers are very hard to read most of the time.I have had no luck reading numbers with just lifting the body. Be prepared to lift body clear of frame and clean and document with rubbing paper and lead pencil. also take photo and have it notery public stamp it. Well good luck you only have to do it one time Don in Indiana
Also look into acid etching to raise the numbers. This is the method police use when the numbers have been ground off of firearms. I assume the number on your engine doesn't match the paperwork.

Charlie Stephens
Charlie Stephens is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 08:25 AM.