Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 09-06-2017, 10:34 PM   #1
Steve Seidl
Senior Member
 
Steve Seidl's Avatar
 
Join Date: May 2010
Location: Ham Lake,Minn
Posts: 118
Cool Removing Door Handle ?

What's the key in removing outside door handle ( passenger side) of 35-37 Ford PU ??
Steve Seidl is offline   Reply With Quote
Old 09-07-2017, 01:00 AM   #2
Talkwrench
Senior Member
 
Talkwrench's Avatar
 
Join Date: Aug 2012
Location: Perth, Western Australia
Posts: 2,687
Default Re: Removing Door Handle ?

Ohh they can be a PITA . You may have to work the door handle on the inside a little while turning the outside just so and withdrawing. there is a slot cut in the square shaft and this needs to be in just the right place when its sits in the mechanism so withdrawing can be hard, Not easy to explain this one until you have it in your hand..
__________________
"Came too close to dying to stop living now!"
Talkwrench is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 09-07-2017, 07:56 AM   #3
TJ
Senior Member
 
TJ's Avatar
 
Join Date: May 2010
Location: Napa,California
Posts: 6,029
Default Re: Removing Door Handle ?

Remove the screws that hold the handle to the outside of the door. Tip the handle down to approximately the 4 o'clock position and pull outward.
TJ is offline   Reply With Quote
Old 09-07-2017, 08:04 AM   #4
deuce lover
Senior Member
 
deuce lover's Avatar
 
Join Date: May 2010
Location: Southern France
Posts: 5,301
Default Re: Removing Door Handle ?

Pushing in the spring loaded striker will help
deuce lover is offline   Reply With Quote
Old 09-07-2017, 08:09 AM   #5
rich b
Senior Member
 
rich b's Avatar
 
Join Date: May 2010
Location: Minnesota
Posts: 1,825
Default Re: Removing Door Handle ?

...and the square shank may be stuck in the latch, so you want to be careful to not damage the latch assembly if it does not slide out readily.
rich b is offline   Reply With Quote
Old 09-09-2017, 01:02 PM   #6
Steve Seidl
Senior Member
 
Steve Seidl's Avatar
 
Join Date: May 2010
Location: Ham Lake,Minn
Posts: 118
Default Re: Removing Door Handle ?

Sponsored Links (Register now to hide all advertisements)
Quote:
Originally Posted by Talkwrench View Post
Ohh they can be a PITA . You may have to work the door handle on the inside a little while turning the outside just so and withdrawing. there is a slot cut in the square shaft and this needs to be in just the right place when its sits in the mechanism so withdrawing can be hard, Not easy to explain this one until you have it in your hand..
Thanks much!^
Steve Seidl is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 11:05 PM.