|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
10-13-2021, 05:24 PM | #11 |
Senior Member
Join Date: May 2010
Location: Solihull, England.
Posts: 8,756
|
Re: NEW starting problem
Paul. You don't polarise the regulator, you polarise the generator.
With all connections in place, you remove the field wire at the regulator and flash it on the bat terminal a couple of times then reattach it. This is pre-loading the field terminals with the correct voltage to polarise the generator. In effect you put a straight 12V* straight to the field windings. * if you are running 12V if not, 6V. |
|
|
Sponsored Links (Register now to hide all advertisements) |
|