Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 01-06-2021, 02:07 PM   #1
S.Duncan
Member
 
Join Date: May 2010
Posts: 85
Default 32 roadster body dimension

I'm in the process of piecing together my long term 32 roadster project. Like many original roadster bodies it was completely disassembled for rear floor and subframe work. I'm looking for an outside to outside measurement between the top iron brackets on top of the quarter panels. Any help is appreciated
S.Duncan is offline   Reply With Quote
Old 01-06-2021, 03:12 PM   #2
Ronnieroadster
Senior Member
 
Ronnieroadster's Avatar
 
Join Date: Dec 2010
Location: East Coast in CT
Posts: 1,510
Default Re: 32 roadster body dimension

Just measured my original Henry Ford body this is what I get 50-5/16. I will tell you my body lines and door gaps are spot on.
Ronnieroadster
__________________
I use the F word a lot no not that word these words Flathead , Focus and Finish.
"Life Member of the Bonneville 200 MPH Club using a Ford Flathead block"
Owner , Builder, Driver of the First Ford Flathead bodied roadster to run 200 MPH Record July 13, 2018 LTA timing association 200.921 in one and a half miles burning gasoline.
First ever gas burning Ford flathead powered roadster to run 200 MPH at Bonneville Salt Flats setting the record August 7th 2021 at 205.744 MPH
Ronnieroadster is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 01-06-2021, 04:43 PM   #3
S.Duncan
Member
 
Join Date: May 2010
Posts: 85
Default Re: 32 roadster body dimension

Thanks Ron
S.Duncan is offline   Reply With Quote
Old 01-06-2021, 04:47 PM   #4
Krylon32
Senior Member
 
Join Date: May 2010
Posts: 4,430
Default Re: 32 roadster body dimension

When we were assembling Brookville 32 bodies when they became available we made a simple fixture out of 3/4inch tubing with a piece of ready rod going thru it. Just put it between the top iron tabs to keep the measurement right without fighting it.

Last edited by Krylon32; 01-06-2021 at 06:25 PM.
Krylon32 is offline   Reply With Quote
Old 01-06-2021, 05:26 PM   #5
Ronnieroadster
Senior Member
 
Ronnieroadster's Avatar
 
Join Date: Dec 2010
Location: East Coast in CT
Posts: 1,510
Default Re: 32 roadster body dimension

Sponsored Links (Register now to hide all advertisements)
Quote:
Originally Posted by S.Duncan View Post
Thanks Ron


Your welcome. The way Kylon32 used the tubing and steady rod is an excellent way to set a dimension.
__________________
I use the F word a lot no not that word these words Flathead , Focus and Finish.
"Life Member of the Bonneville 200 MPH Club using a Ford Flathead block"
Owner , Builder, Driver of the First Ford Flathead bodied roadster to run 200 MPH Record July 13, 2018 LTA timing association 200.921 in one and a half miles burning gasoline.
First ever gas burning Ford flathead powered roadster to run 200 MPH at Bonneville Salt Flats setting the record August 7th 2021 at 205.744 MPH
Ronnieroadster is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 08:07 AM.