The Ford Barn

adileo · 10-09-2020, 10:22 AM

Hey guys

I need to replace front motor mounts. Pretty simple I’m thinking but want to double check with those who have done it many times before.

Cotter pin out loosen/remove castle nut.
Place 2x4 on floor jack - roll under oil pan and lift engine, a couple inches.
Tap old bolt until able to remove top biscuit.
Work under truck and remove lower biscuit

Do reverse for install.

Sound right? Any suggestions or miss anything?

As always thanks in advance!

skidmarks · 10-09-2020, 10:37 AM

Sponsored Links (Register now to hide all advertisements)

Jack the motor up just enough to change the biscuits.
A couple inches , your radiator and exhaust wont like it.

10-09-2020, 10:22 AM	#1
adileo Senior Member Join Date: Jun 2014 Location: New Jersey Posts: 1,772	52 F1 motor mounts Hey guys I need to replace front motor mounts. Pretty simple I’m thinking but want to double check with those who have done it many times before. Cotter pin out loosen/remove castle nut. Place 2x4 on floor jack - roll under oil pan and lift engine, a couple inches. Tap old bolt until able to remove top biscuit. Work under truck and remove lower biscuit Do reverse for install. Sound right? Any suggestions or miss anything? As always thanks in advance! __________________ Thanks Andy 1952 F1

10-09-2020, 10:37 AM	#2
skidmarks Senior Member Join Date: Aug 2010 Location: newark, delaware Posts: 3,735	Re: 52 F1 motor mounts Sponsored Links (Register now to hide all advertisements) Jack the motor up just enough to change the biscuits. A couple inches , your radiator and exhaust wont like it.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode