The Ford Barn

henry's 31 · 12-07-2016, 08:19 PM

Has anyone received the new Judging Standard from any of the 2 major National Club?

Have "A" great week.

Gary WA · 12-07-2016, 08:27 PM

Not yet on order tho

DaWizard · 12-07-2016, 09:25 PM

Quote:

Originally Posted by Gary WA

Not yet on order tho

Hey Gary, your antlers are showing.

Still waiting on mine.

C26Pinelake · 12-07-2016, 10:53 PM

late as usual! Wayne

Mike V. Florida · 12-09-2016, 12:13 AM

The books are in the hands of the two clubs judging chairman. It is my understanding that the books are "done" except for the the final approval from the two chairs. If one does not like what is presented the other must agree as well. I hope I'm wrong but this back and forth can take a while. Is it a desire to get it done right of a desire to have the last word? I don't know.

DaWizard · 12-09-2016, 12:31 AM

Sponsored Links (Register now to hide all advertisements)

Sounds to me like we won't see them til after the 1st. *sighs*

Tom Wesenberg · 12-09-2016, 12:36 AM

Wait until the Christmas package mailing rush is over.
That way there's less chance of them being lost in the mail.

springerpete · 12-09-2016, 06:42 AM

I talked to the MAFCA office Wednesday and the lady told me they are still at the printer and are expected " any time now." She also said the printer has been saying this for weeks. Her guestimate was within a month. It will make good reading during a snow storm I guess.

Steve Wastler · 12-09-2016, 07:26 AM

I checked Mafca web site yesterday and the message there was posted on Nov 29 that they were still at the printers awaiting the start of the production run. Not too likely any large quantity are at either club headquarters. The delay seems to be from printers....

Mitch//pa · 12-09-2016, 07:32 AM

Mike V are u sure your info is correct?

RJV · 12-09-2016, 12:16 PM

It wouldn't be at the printer if both clubs/committees/chairmen hadn't approved.

CarlG · 12-09-2016, 04:41 PM

I worked my way thru college at a print shop. It was always the printer's fault if something was delayed.

Jim Mason · 12-09-2016, 08:35 PM

I got mine

Bawahaha. ..no not yet

Flathead · 12-09-2016, 11:04 PM

I don't have mine yet either. When I ordered and paid for them at Hershey they were going to be going right out. They've been teasing us for a while now but I guess we have no choice but to wait.

C26Pinelake · 12-09-2016, 11:22 PM

You call it teasing, I call it a lack of credibility! Why has a member of the executive not replied to this thread ? Wayne

Mike V. Florida · 12-09-2016, 11:43 PM

Quote:

Originally Posted by RJV

It wouldn't be at the printer if both clubs/committees/chairmen hadn't approved.

Are they at the printer? Makes no sense tome that a job should wait so long (Months) before being completed. That's money sitting on a computer file. Is business so good that they can wait months before pushing a button?

As I said above and in a couple of other places, I hope I'm wrong, I want to be wrong, I want it to be at the printers. I would love it if an officer of one of the clubs could give a definitive answer.

C26Pinelake · 12-09-2016, 11:55 PM

Quote:

Originally Posted by Mike V. Florida

Are they at the printer?

Previous post received his so they must b back. Wayne

C26Pinelake · 12-10-2016, 02:38 AM

Quote:

Originally Posted by forever4

Regarding the RG&JS, I prefer to be patient and appreciative, rather than be unhappy, deprived, self-centered, and self-entitled.

This topic draws responses similar to those by the many people who can't seem to resist repeatedly posting and complaining when they think their bi-monthly magazines might be running late to their mailbox.

It will be available when it is available, and it will be great!

You have a tremendous grasp of the obvious. The executive must live up to a high degree or level of integrity and deliver when promised. They also can not go into hiding when a contentious issue is raised which they seem to have perfected. The Chairnan should step forward with a factual statement. Wayne

updraught · 12-10-2016, 04:41 AM

When do the digital editions of the MAFCA newsletters come out?

C26Pinelake · 12-10-2016, 07:14 AM

During the recent Model A club elections there was a gentleman on here severs limes a day answering questions and virtually begging for votes. He got elected but now he seems to have just about disappeared. Why is he not providing answers? Maybe he will not show again until next election. Wayne.

12-07-2016, 08:19 PM	#1
henry's 31 Senior Member Join Date: Mar 2014 Location: Columbus(Cataula) Georgia Posts: 849	Has anyone received the new Judging Standard? Has anyone received the new Judging Standard from any of the 2 major National Club? Have "A" great week. __________________ Henry' s 31

12-07-2016, 10:53 PM	#4
C26Pinelake BANNED Join Date: May 2010 Location: Michigan / Ontario border, Sarnia, Ontario. 50 miles from Detroit and 150 from Toronto. Posts: 5,800	Re: Has anyone received the new Judging Standard? *late as usual! Wayne*

12-09-2016, 12:13 AM	#5
Mike V. Florida Senior Member Join Date: May 2010 Location: South Florida Posts: 14,054	Re: Has anyone received the new Judging Standard? The books are in the hands of the two clubs judging chairman. It is my understanding that the books are "done" except for the the final approval from the two chairs. If one does not like what is presented the other must agree as well. I hope I'm wrong but this back and forth can take a while. Is it a desire to get it done right of a desire to have the last word? I don't know. __________________ What's right about America is that although we have a mess of problems, we have great capacity - intellect and resources - to do some thing about them. - Henry Ford II

12-09-2016, 12:31 AM	#6
DaWizard BANNED Join Date: Nov 2016 Location: Dizzyland Ca Posts: 332	Re: Has anyone received the new Judging Standard? Sponsored Links (Register now to hide all advertisements) Sounds to me like we won't see them til after the 1st. sighs __________________ New owner of '28 Tudor Previously owned; '30 Sport Coupe '28 left brake ccPickup '31 SW Town Sedan '28 AA Stake Bed '30 Cabriolet '42 Super Deluxe 4door Sedan "If it don't fit, get a bigger hammer. If it breaks...... ya needed a new one anyway!!" Doing a good job here is like wetting your pants in a dark suit. It gives you a warm feeling, but nobody notices. Never pass up a bathroom Never neglect an erection Never trust a fart

12-09-2016, 12:36 AM	#7
Tom Wesenberg Senior Member Join Date: May 2010 Location: Mpls, MN Posts: 27,582	Re: Has anyone received the new Judging Standard? Wait until the Christmas package mailing rush is over. That way there's less chance of them being lost in the mail.

12-09-2016, 06:42 AM	#8
springerpete Senior Member Join Date: Jul 2012 Location: Central Maine Posts: 644	Re: Has anyone received the new Judging Standard? I talked to the MAFCA office Wednesday and the lady told me they are still at the printer and are expected " any time now." She also said the printer has been saying this for weeks. Her guestimate was within a month. It will make good reading during a snow storm I guess.

12-09-2016, 07:26 AM	#9
Steve Wastler Senior Member Join Date: May 2010 Posts: 1,987	Re: Has anyone received the new Judging Standard? I checked Mafca web site yesterday and the message there was posted on Nov 29 that they were still at the printers awaiting the start of the production run. Not too likely any large quantity are at either club headquarters. The delay seems to be from printers....

12-09-2016, 07:32 AM	#10
Mitch//pa BANNED Join Date: May 2010 Location: Bucks County, PA Posts: 11,454	Re: Has anyone received the new Judging Standard? Mike V are u sure your info is correct?

12-09-2016, 12:16 PM	#11
RJV Senior Member Join Date: Nov 2016 Location: SE Michigan Posts: 621	Re: Has anyone received the new Judging Standard? It wouldn't be at the printer if both clubs/committees/chairmen hadn't approved.

12-09-2016, 04:41 PM	#12
CarlG Senior Member Join Date: Nov 2010 Location: Anchorage, Alaska Posts: 9,115	Re: Has anyone received the new Judging Standard? I worked my way thru college at a print shop. It was always the printer's fault if something was delayed. __________________ Alaskan A's Antique Auto Mushers of Alaska Model A Ford Club of America Model A Restorers Club Antique Automobile Club of America Mullins Owner's Club

12-09-2016, 08:35 PM	#13
Jim Mason Senior Member Join Date: May 2010 Posts: 914	Re: Has anyone received the new Judging Standard? I got mine Bawahaha. ..no not yet __________________ www.jmodela.coffeecup.com Fwiw, jm.

12-09-2016, 11:04 PM	#14
Flathead Senior Member Join Date: May 2010 Location: Southern Maine Posts: 1,498	Re: Has anyone received the new Judging Standard? I don't have mine yet either. When I ordered and paid for them at Hershey they were going to be going right out. They've been teasing us for a while now but I guess we have no choice but to wait.

12-09-2016, 11:22 PM	#15
C26Pinelake BANNED Join Date: May 2010 Location: Michigan / Ontario border, Sarnia, Ontario. 50 miles from Detroit and 150 from Toronto. Posts: 5,800	Re: Has anyone received the new Judging Standard? You call it teasing, I call it a lack of credibility! Why has a member of the executive not replied to this thread ? Wayne

12-10-2016, 04:41 AM	#19
updraught Senior Member Join Date: Feb 2015 Location: Australia Posts: 1,970	Re: Has anyone received the new Judging Standard? When do the digital editions of the MAFCA newsletters come out?

12-10-2016, 07:14 AM	#20
C26Pinelake BANNED Join Date: May 2010 Location: Michigan / Ontario border, Sarnia, Ontario. 50 miles from Detroit and 150 from Toronto. Posts: 5,800	Re: Has anyone received the new Judging Standard? During the recent Model A club elections there was a gentleman on here severs limes a day answering questions and virtually begging for votes. He got elected but now he seems to have just about disappeared. Why is he not providing answers? Maybe he will not show again until next election. Wayne. Last edited by C26Pinelake; 12-10-2016 at 03:05 PM.