The Ford Barn

55 dude · 02-29-2016, 12:11 PM

i have found some pieces to what i think are 33-34 panel. i would like to talk to someone who has one. thanks

55 dude · 03-01-2016, 02:27 AM

bttt!

Cool 33 · 03-01-2016, 06:05 AM

Could be. The wheel well location could help to identify. If it is more off center to wards the front, then probably 32. Closer to center then 33-34. The door is for something more late 40's and probably not Ford.

Fordors · 03-01-2016, 09:00 AM

As mentioned the wheel well location is different, '32 is 106" WB and '33-'34 are 112", but I believe the '32 looks more centered. The upper side panel reveal lines are different between the two also, with a radius that matches the one shown in your photo at the front and rear on the '32. If there is a like radius at both ends on the upper reveal line then it's '32, and if the rear is radiused and the front square you have '33-'34 quarters. The door shown is not Ford.

55 dude · 03-02-2016, 08:22 AM

thanks!

55 dude · 03-07-2016, 01:38 AM

Sponsored Links (Register now to hide all advertisements)

new pictures say it's 33/34! need id on fender.

deuce lover · 03-07-2016, 02:18 AM

Post a pic of the front lower section of the fender where it sits on the frame.There should be a small raised area near where the grill shell sits.If so its a 33-34 commercial.The dash is 33-34 commercial.

55 dude · 03-07-2016, 09:18 PM

so if no raised area it's a 32?

deuce lover · 03-07-2016, 10:00 PM

Most likely yes.A mounting hole for the front frame horn is in the slope next to where it flattens out .Maybe someone can chime in and post a pic.

03-01-2016, 02:27 AM	#2
55 dude Senior Member Join Date: May 2010 Posts: 359	Re: 33-34 light duty panel bttt!

03-01-2016, 06:05 AM	#3
Cool 33 Senior Member Join Date: May 2010 Location: Forney, Tex. Posts: 143	Re: 33-34 light duty panel Could be. The wheel well location could help to identify. If it is more off center to wards the front, then probably 32. Closer to center then 33-34. The door is for something more late 40's and probably not Ford.

03-01-2016, 09:00 AM	#4
Fordors Senior Member Join Date: May 2010 Location: Orland Park,IL Posts: 1,402	Re: 33-34 light duty panel As mentioned the wheel well location is different, '32 is 106" WB and '33-'34 are 112", but I believe the '32 looks more centered. The upper side panel reveal lines are different between the two also, with a radius that matches the one shown in your photo at the front and rear on the '32. If there is a like radius at both ends on the upper reveal line then it's '32, and if the rear is radiused and the front square you have '33-'34 quarters. The door shown is not Ford. __________________ My school colors are black and blue, I attended the School of Hard Knocks where I received a Masters Degree in Chronic Mopery.

03-02-2016, 08:22 AM	#5
55 dude Senior Member Join Date: May 2010 Posts: 359	Re: 33-34 light duty panel thanks!

03-07-2016, 02:18 AM	#7
deuce lover Senior Member Join Date: May 2010 Location: Southern France Posts: 5,301	Re: 33-34 light duty panel Post a pic of the front lower section of the fender where it sits on the frame.There should be a small raised area near where the grill shell sits.If so its a 33-34 commercial.The dash is 33-34 commercial.

03-07-2016, 10:00 PM	#9
deuce lover Senior Member Join Date: May 2010 Location: Southern France Posts: 5,301	Re: 33-34 light duty panel Most likely yes.A mounting hole for the front frame horn is in the slope next to where it flattens out .Maybe someone can chime in and post a pic.