|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
09-22-2012, 02:23 AM | #1 |
Senior Member
Join Date: May 2010
Posts: 359
|
38' pickup hood hinge
guys my hood hinges look to have come apart and i need to find the correct rivets and the procedure to install them so can someone shed some light on this? I can take and post pic's if needed. thanks!
|
09-22-2012, 05:01 PM | #2 |
Senior Member
Join Date: Feb 2011
Location: Monroe, Wi
Posts: 247
|
Re: 38' pickup hood hinge
I have drilled one of the rivets out of my hinge, I would say the closest size would be a round head rivet 5/6 x 7/16. I think you would have to build an adjustable bridge fixture incorporating the rivet sets into the fixture and set them with a press so you get them tight but not to tight. This could be another winter project for me. here is a link to a company that has the right size rivets. http://www.rivetsonline.com/5-16-sol...-aluminum.html I bought a NOS right side hinge off of ebay a couple of months so this got put on the back burner.
|
Sponsored Links (Register now to hide all advertisements) |
|
09-24-2012, 12:08 PM | #3 |
Senior Member
Join Date: May 2010
Posts: 359
|
Re: 38' pickup hood hinge
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|